[U-Boot] Pull request - net

Wolfgang Denk
2009-06-15T09:21:16Z

Dear Ben Warren,

In message <4A35F5A0.4030501@gmail.com> you wrote:
> Wolfgang,
>
> The following changes since commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6:
> Mike Frysinger (1):
> add %.c->%.i and %.c->%.s rules
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-net master
>
> Ben Warren (4):
> Moved Davinci Ethernet driver to drivers/net
> Initial cleanup of Davinci Ethernet driver
> Switched davinci_emac Ethernet driver to use newer API
> Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC
>
> Norbert van Bolhuis (1):
> A VLAN tagged DHCP request/discover is 4 bytes short
>
> Prafulla Wadaskar (2):
> Marvell MV88E61XX Switch Driver support
> net: Add Marvell Kirkwood gigabit ethernet driver
>
> Remy Bohmer (1):
> Convert DM9000 driver for CONFIG_NET_MULTI
>
> Richard Retanubun (1):
> Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.
>
> Zach LeRoy (1):
> tsec: Add support for BCM5482S PHY
>
> s-paulraj at ti.com (1):
> DaVinci Network Driver Updates
>
> board/atmel/at91sam9261ek/at91sam9261ek.c | 7 +
> board/davinci/common/misc.h | 1 -
> board/davinci/dvevm/dvevm.c | 3 -
> board/davinci/schmoogie/schmoogie.c | 3 -
> board/davinci/sffsdr/sffsdr.c | 3 -
> board/davinci/sonata/sonata.c | 3 -
> board/freescale/m5253demo/m5253demo.c | 9 +
> board/scb9328/scb9328.c | 8 +
> board/trizepsiv/conxs.c | 8 +
> cpu/arm926ejs/davinci/Makefile | 2 +-
> cpu/arm926ejs/davinci/cpu.c | 12 +
> drivers/net/4xx_enet.c | 54 --
> drivers/net/Makefile | 2 +
> .../davinci/ether.c => drivers/net/davinci_emac.c | 214 +++----
> drivers/net/dm9000x.c | 44 +-
> drivers/net/kirkwood_egiga.c | 664 ++++++++++++++++++++
> drivers/net/kirkwood_egiga.h | 503 +++++++++++++++
> drivers/net/mcfmii.c | 2 +-
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/mv88e61xx.c | 413 ++++++++++++
> drivers/net/phy/mv88e61xx.h | 62 ++
> drivers/net/tsec.c | 41 ++
> include/asm-arm/arch-davinci/emac_defs.h | 32 +-
> include/configs/M5253DEMO.h | 1 +
> include/configs/at91sam9261ek.h | 1 +
> include/configs/davinci_dvevm.h | 1 +
> include/configs/davinci_schmoogie.h | 1 +
> include/configs/davinci_sffsdr.h | 1 +
> include/configs/davinci_sonata.h | 1 +
> include/configs/scb9328.h | 1 +
> include/configs/trizepsiv.h | 1 +
> include/netdev.h | 50 ++
> include/tsec.h | 2 +
> net/bootp.c | 4 +-
> net/eth.c | 8 -
> 35 files changed, 1944 insertions(+), 219 deletions(-)
> rename cpu/arm926ejs/davinci/ether.c => drivers/net/davinci_emac.c (93%)
> create mode 100644 drivers/net/kirkwood_egiga.c
> create mode 100644 drivers/net/kirkwood_egiga.h
> create mode 100644 drivers/net/phy/mv88e61xx.c
> create mode 100644 drivers/net/phy/mv88e61xx.h

Done, thanks.

Best regards,

Wolfgang Denk

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It takes all sorts of in & out-door schooling to get adapted to my
kind of fooling" - R. Frost