From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Schwarz Date: Wed, 10 Sep 2008 13:52:14 +0200 Subject: [U-Boot] LAN Timeout In-Reply-To: <48BBA2C7.187F.00BC.0@feig.de> References: <48B3DE7B.187F.00BC.0@feig.de> <48BBA2C7.187F.00BC.0@feig.de> Message-ID: <48C7B4EE.2050206@matrix-vision.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Manuel, we do this with conditional boot depending on environment settings, e.g. "netboot" yes or no. If netboot==no then omit bootp/dhcp completely and proceed to boot from flash. Otherwise try netboot and stick to the timeout. Autoneg can indeed take some time ... This can easily be done with a bootscript, i.e. bootcmd=autoscr valid_addr. regards, Andre Manuel Sahm schrieb: > Hello, > > isn??t anybody out there who could help me ? > > Thank you > > > >>>> "Manuel Sahm" 26.08.2008 10:44 >>> >>>> > Hello, > > I have a problem concnering the LAN Connection Timeout. > > I uses a Teridian Phy connected via MII Interface to an AT91SAM9260. > All works fine. If I boot my system uboot comes up and detects the > connection very quickly, so that my system boots fast. > But if I have no lan cable plugged in when I boot my system, it takes > some seconds to detect that no lan cable is plugged in and a timeout > occurs. > > How could I speed up my booting sequence if there is no lan cable > plugged in ? > > Thank you very much > > > Best regards > > Manuel Sahm > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner