[U-Boot] [ELDK] Serial console on Lite5200

[Jerry Van Baren <gvb.uboot@gmail.com>]

Chuan Neng Lee wrote:
> Hi, I have a board that is based on the Lite5200b design,
> except that the serial console is on PSC4 instead of PSC1.
> Using the latest U-boot and latest kernel, I managed to get
> U-boot to output on the console on PSC4, but the kernel
> does not.
> 
> For U-boot, I changed the CONFIG_PSC_CONSOLE definition to
> "4" instead of "1" and also changed the PSC4 port mode from
> USB to serial port.  When that worked, I then uncommented the
> kernel's lite5200b.dts section for serial at 2600 (PSC4), thinking
> that would do it.  However, it is not sufficient.  What am I
> missing?
> 
> Thank you!
> 
> - C N Lee

I presume you fixed the /aliases node to point to serial at 2600 too?  Odd, 
there isn't an /aliases node in the kernel lite5200.dts.  I may not know 
what I'm talking about.  How do you specify the console to linux?  (That 
is a rhetorical question.  I don't know myself.)

Oh, and I see you posted to the eldk list, it should have been posted to 
the u-boot list (I cross posted this reply).

Best regards,
gvb