[U-Boot] MPC8555CDS broken on TOT (commit 8fd4166c, ELDK 4.2)

[Bartlomiej Sieka <tur@semihalf.com>]

Hello,

TOT U-Boot (commit 8fd4166c, compiled with ELDK 4.2) for the MPC8555CDS
target is broken with the following symptoms:


[flash the 8fd4166c image and reset the board]

U-Boot 2008.10-rc2-00018-g8fd4166 (Sep 23 2008 - 10:23:59)

CPU:   8555E, Version: 1.1, (0x80790011)
Core:  E500, Version: 2.0, (0x80200020)
Clock Configuration:
        CPU: 825 MHz, CCB: 330 MHz,
        DDR: 165 MHz (330 MT/s data rate), LBC:  82 MHz
CPM:   330 Mhz
L1:    D-cache 32 kB enabled
        I-cache 32 kB enabled
Board: CDS Version 0x11, PCI Slot 1
CPU Board Revision 0.0 (0x0000)
     PCI1: 32 bit, 33 MHz, sync
     PCI2: 32 bit, 66 MHz, sync
I2C:   ready
DRAM:  Initializing
     SDRAM: 64 MB
     DDR: 256 MB


And the output stops here, console is dead. Can't give more details as
to what's going on the board -- don't have a HW debugger available.

After a power-cycle, the board doesn't go as far as the first time after
reset:

U-Boot 2008.10-rc2-00018-g8fd4166 (Sep 23 2008 - 10:23:59)

CPU:   8555E, Version: 1.1, (0x80790011)
Core:  E500, Version: 2.0, (0x80200020)
Clock Configuration:
        CPU: 825 MHz, CCB: 330 MHz,
        DDR: 165 MHz (330 MT/s data rate), LBC:  82 MHz
CPM:   330 Mhz
L1:    D-cache 32 kB enabled
        I-cache 32 kB enabled

Subsequent power-cycles result in the same output, i.e., the output dies
after the "I-cache 32 kB enabled" line.

The U-Boot works fine as of commit 71074abb, but can't do a full
bisection at the moment (can't flash the board easily).

Brief search of the ML archives didn't reveal any such issue reported,
so I'm posting this as a data point, and in the hopes that someone can
take further investigation from here. I'll be happy to provide more
details if needed, and might also be able to test a potential fix.

Regards,
Bartlomiej Sieka