From: Bartlomiej Sieka <tur@semihalf.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] net: Make TFTP server timeout configurable
Date: Thu, 25 Sep 2008 08:17:07 +0200 [thread overview]
Message-ID: <48DB2CE3.5050202@semihalf.com> (raw)
In-Reply-To: <20080922204213.87B33248EE@gemini.denx.de>
Wolfgang Denk wrote:
> Dear Bartek,
>
> In message <48D33E23.3020502@semihalf.com> you wrote:
>>> Are seconds an appropriate scale factor for the timeout?
> ...
>> The patch didn't introduce changes in this regard -- TFTP timeouts were
>> defined in seconds originally. The patch makes the timeout behavior
>> configurable, instead of being hardcoded, but the units remain the same:
>
> But the argument was a perfectly valid one. I am, too, concerned that
> second resolution is not optimal any more (it was as long as we needed
> just one timeout long enough, but this situation will be changed by
> your other patches).
>
> So please extend that patch to change this into milliseconds as
> discussed before.
OK, v2 of the patches will implement milisecond granularity for initial
TFTP server timeout.
Regards,
Bartlomiej Sieka
next prev parent reply other threads:[~2008-09-25 6:17 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-18 15:03 [U-Boot] Automatic software updates in U-Boot Bartlomiej Sieka
2008-09-18 15:03 ` [U-Boot] [PATCH 1/3] net: Make TFTP server timeout configurable Bartlomiej Sieka
2008-09-18 15:17 ` Jerry Van Baren
2008-09-18 21:54 ` Graeme Russ
2008-09-19 1:37 ` Jerry Van Baren
2008-09-19 5:52 ` Bartlomiej Sieka
2008-09-22 20:42 ` Wolfgang Denk
2008-09-25 6:17 ` Bartlomiej Sieka [this message]
2008-09-18 15:03 ` [U-Boot] [PATCH 2/3] Automatic software update from TFTP server Bartlomiej Sieka
2008-09-22 21:03 ` Wolfgang Denk
2008-09-25 8:16 ` Bartlomiej Sieka
2008-09-25 8:55 ` Wolfgang Denk
2008-09-25 9:49 ` Bartlomiej Sieka
2008-09-25 10:01 ` Wolfgang Denk
2008-09-26 8:46 ` Detlev Zundel
2008-09-25 15:33 ` Andrew Dyer
2008-09-25 16:28 ` Kim Phillips
2008-09-25 16:24 ` Jerry Van Baren
2008-09-25 18:17 ` Wolfgang Denk
2008-09-25 19:21 ` Kim Phillips
2008-09-26 8:08 ` Bartlomiej Sieka
2008-09-26 8:29 ` Wolfgang Denk
2008-09-26 8:29 ` Bartlomiej Sieka
2008-09-18 15:03 ` [U-Boot] [PATCH 3/3] FIT: output image load address for type 'firmware', fix debug msg while there Bartlomiej Sieka
2008-10-01 13:26 ` [U-Boot] Automatic software updates in U-Boot -- version 2 Bartlomiej Sieka
2008-10-13 22:57 ` Wolfgang Denk
2008-10-14 12:42 ` Bartlomiej Sieka
2008-10-14 13:47 ` Wolfgang Denk
2008-10-14 20:07 ` Wolfgang Denk
2008-10-15 9:45 ` Bartlomiej Sieka
2008-10-01 13:26 ` [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector Bartlomiej Sieka
2008-10-08 7:39 ` Bartlomiej Sieka
2008-10-08 7:47 ` Stefan Roese
2008-10-08 8:05 ` Bartlomiej Sieka
2008-10-08 8:16 ` Wolfgang Denk
2008-10-08 12:02 ` Stefan Roese
2008-10-13 22:28 ` Wolfgang Denk
2008-10-08 17:38 ` Ben Warren
2008-10-13 22:30 ` Wolfgang Denk
2008-10-01 13:26 ` [U-Boot] [PATCH v2 2/6] net: express the first argument to NetSetTimeout() in milliseconds Bartlomiej Sieka
2008-10-06 5:13 ` Ben Warren
2008-10-01 13:26 ` [U-Boot] [PATCH v2 3/6] net: Make TFTP server timeout configurable Bartlomiej Sieka
2008-10-06 5:13 ` Ben Warren
2008-10-01 13:26 ` [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile Bartlomiej Sieka
2008-10-08 12:29 ` Jean-Christophe PLAGNIOL-VILLARD
2008-10-08 12:58 ` Bartlomiej Sieka
2008-10-08 14:50 ` Jean-Christophe PLAGNIOL-VILLARD
2008-10-09 8:40 ` Bartlomiej Sieka
2008-10-01 13:26 ` [U-Boot] [PATCH v2 5/6] Automatic software update from TFTP server Bartlomiej Sieka
2008-10-13 22:37 ` Wolfgang Denk
2008-10-01 13:26 ` [U-Boot] [PATCH v2 6/6] FIT: output image load address for type 'firmware', fix message while there Bartlomiej Sieka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48DB2CE3.5050202@semihalf.com \
--to=tur@semihalf.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox