* [U-Boot] 2* Coldfire MCF5272 Evalboards - free for the shipping
@ 2008-09-27 13:19 Michael Schwingen
0 siblings, 0 replies; only message in thread
From: Michael Schwingen @ 2008-09-27 13:19 UTC (permalink / raw)
To: u-boot
Hi,
I hope this is not too off-topic here.
I have two of these boards:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5272C3
to give away for the cost of shipping - preferrably inside the EU, because I do not want to deal with customs.
I salvaged them from being scrapped some years ago, and never got around to use them. I just tested that the dbug bootloader in flash works & is able to load and start a uCLinux image via net.
The boards have a BDM connector and come with a P&E parallel port BDM wiggler, but without any software, so you will probably need to supply your own BDM debugger for u-boot development.
Please reply by mail if you want one.
cu
Michael
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-09-27 13:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-27 13:19 [U-Boot] 2* Coldfire MCF5272 Evalboards - free for the shipping Michael Schwingen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox