[U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544

[Wolfgang Grandegger <wg@grandegger.com>]

Kumar Gala wrote:
> On Sep 30, 2008, at 3:55 AM, Wolfgang Grandegger wrote:
> 
>> Measurements with our MPC8544 board showed that the I2C bus frequency
>> is wrong by a factor of 1.5. Obviously, the interpretation of the
>> MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
>> correct. There seems to be an error in the 8544 RM.
>>
>> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
>> ---
>> cpu/mpc85xx/speed.c |    4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
> 
> can you do me a favor and dump the value of MPC85xx_PORDEVSR2.  Also  
> can you tell me what rev 8544 you have.

See below:

  pordevsr2 at e00e0014=0x8f00007d

  CPU:   8544E, Version: 1.1, (0x803c0111)
  Core:  E500, Version: 2.2, (0x80210022)
  Clock Configuration:
         CPU: 667 MHz, CCB: 334 MHz,
         DDR: 167 MHz (334 MT/s data rate), LBC:  41 MHz
  L1:    D-cache 32 kB enabled
         I-cache 32 kB enabled
  Board: Socrates

Wolfgang.