[U-Boot] [PATCH v2 0/16] updates for mgcoge, mgsuvd.

[U-Boot] [PATCH v2 0/16] updates for mgcoge, mgsuvd.

[Heiko Schocher]

The following patchseries updates the mgcoge
and mgsuvd board with new features:

- fixes some codingstyle issues
- add I2C support
- add LM75, EEprom support
- uses I2C Multibus feature
- add new I2C Bus command for adding new I2C
  busses behind 1..n I2C mux(es).
- This Manufacturer uses a I2C deblocking
  mechanism, which was developed with Atmel.
  This patchseries introduce this as a
  boardspecific deblocking algorithm. Maybe
  it is good for a common deblocking mechanism?
- analyse some information contained in the
  EEProm and saves this information in hush shell
  variables.
- adds bootcount feature

Also I did a lot of rework of the patches, because
my First post of this patchseries was not optimal.

Signed-off-by: Heiko Schocher <hs@denx.de>
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH v2 0/16] updates for mgcoge, mgsuvd.

[Wolfgang Denk]

Dear Heiko Schocher,

In message <48F59C60.2050208@denx.de> you wrote:
> The following patchseries updates the mgcoge
> and mgsuvd board with new features:
> 
> - fixes some codingstyle issues
> - add I2C support
> - add LM75, EEprom support
> - uses I2C Multibus feature
> - add new I2C Bus command for adding new I2C
>   busses behind 1..n I2C mux(es).
> - This Manufacturer uses a I2C deblocking
>   mechanism, which was developed with Atmel.
>   This patchseries introduce this as a
>   boardspecific deblocking algorithm. Maybe
>   it is good for a common deblocking mechanism?
> - analyse some information contained in the
>   EEProm and saves this information in hush shell
>   variables.
> - adds bootcount feature
> 
> Also I did a lot of rework of the patches, because
> my First post of this patchseries was not optimal.
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>

All patches applied to "next" branch.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I know engineers. They love to change things.             - Dr. McCoy