From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Thu, 16 Oct 2008 18:59:31 +0200 Subject: [U-Boot] [PATCH v2 02/16] [PATCH] I2C: add new command i2c reset. In-Reply-To: <48F76E78.6020500@gmail.com> References: <48F59CCA.8020007@denx.de> <48F61CA4.4000401@gmail.com> <48F758E5.2040604@denx.de> <48F76E78.6020500@gmail.com> Message-ID: <48F772F3.5050001@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Ben, Ben Warren wrote: > Heiko Schocher wrote: >> Hello Ben, >> >> Ben Warren wrote: >> >>> Heiko Schocher wrote: >>> >> [...] >> >>>> "i2c probe - show devices on the I2C bus\n" >>>> + "i2c reset - reinit the I2C Controller\n" >>>> >>> re-init or re-initialize would be better. >>> >> >> You are right (as I wrote in the help text ...) >> >> Is "i2c reinit" as commandname ok? >> >> bye >> Heiko >> > I don't have a problem with 'i2c reset' or 'i2c reinit' as commands, > since it's best to not have punctuation symbols in commands, but in the > help text we should use proper words, either 'reset', 're-init' or > 're-initialize'. Ah, okay. Then I fix just the help text, thanks. bye Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany