[U-Boot] [POWERPC] mgsuvd: fix codingstyle

[U-Boot] [POWERPC] mgsuvd: fix codingstyle

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>
---
 board/keymile/mgsuvd/mgsuvd.c |   67 +++++++++++++++++-----------------------
 include/configs/mgsuvd.h      |   10 ++----
 2 files changed, 33 insertions(+), 44 deletions(-)

diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c
index 912e177..de4668c 100644
--- a/board/keymile/mgsuvd/mgsuvd.c
+++ b/board/keymile/mgsuvd/mgsuvd.c
@@ -20,11 +20,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-
-#if 0
-#define DEBUG
-#endif
-
 #include <common.h>
 #include <mpc8xx.h>

@@ -157,80 +152,76 @@ int hush_init_var (void)
 /*
  * update "memory" property in the blob
  */
-void ft_blob_update(void *blob, bd_t *bd)
+void ft_blob_update (void *blob, bd_t *bd)
 {
 	int ret, nodeoffset = 0;
 	ulong brg_data[1] = {0};
 	ulong memory_data[2] = {0};
 	ulong flash_data[4] = {0};

-	memory_data[0] = cpu_to_be32(bd->bi_memstart);
-	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+	memory_data[0] = cpu_to_be32 (bd->bi_memstart);
+	memory_data[1] = cpu_to_be32 (bd->bi_memsize);

-		nodeoffset = fdt_path_offset (blob, "/memory");
-		if (nodeoffset >= 0) {
-			ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
-						sizeof(memory_data));
+	nodeoffset = fdt_path_offset (blob, "/memory");
+	if (nodeoffset >= 0) {
+		ret = fdt_setprop (blob, nodeoffset, "reg", memory_data,
+					sizeof (memory_data));
 		if (ret < 0)
 			printf("ft_blob_update(): cannot set /memory/reg "
-				"property err:%s\n", fdt_strerror(ret));
-		}
-		else {
+				"property err:%s\n", fdt_strerror (ret));
+		} else {
 			/* memory node is required in dts */
 			printf("ft_blob_update(): cannot find /memory node "
-			"err:%s\n", fdt_strerror(nodeoffset));
+				"err:%s\n", fdt_strerror (nodeoffset));
 	}

-	flash_data[2] = cpu_to_be32(bd->bi_flashstart);
-	flash_data[3] = cpu_to_be32(bd->bi_flashsize);
+	flash_data[2] = cpu_to_be32 (bd->bi_flashstart);
+	flash_data[3] = cpu_to_be32 (bd->bi_flashsize);
 	nodeoffset = fdt_path_offset (blob, "/localbus");
 	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
-					sizeof(flash_data));
+		ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data,
+					sizeof (flash_data));
 	if (ret < 0)
 		printf("ft_blob_update(): cannot set /localbus/ranges "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
+			"property err:%s\n", fdt_strerror (ret));
+	} else {
 		/* memory node is required in dts */
 		printf("ft_blob_update(): cannot find /localbus node "
-		"err:%s\n", fdt_strerror(nodeoffset));
+			"err:%s\n", fdt_strerror (nodeoffset));
 	}
 	/* BRG */
-	brg_data[0] = cpu_to_be32(bd->bi_busfreq);
+	brg_data[0] = cpu_to_be32 (bd->bi_busfreq);
 	nodeoffset = fdt_path_offset (blob, "/soc/cpm");
 	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data,
-					sizeof(brg_data));
+		ret = fdt_setprop (blob, nodeoffset, "brg-frequency", brg_data,
+					sizeof (brg_data));
 	if (ret < 0)
 		printf("ft_blob_update(): cannot set /soc/cpm/brg-frequency "
 			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
+	} else {
 		/* memory node is required in dts */
 		printf("ft_blob_update(): cannot find /soc/cpm node "
-		"err:%s\n", fdt_strerror(nodeoffset));
+			"err:%s\n", fdt_strerror (nodeoffset));
 	}
 	/* MAC Adresse */
 	nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
 	if (nodeoffset >= 0) {
-		ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
-					sizeof(uchar) * 6);
+		ret = fdt_setprop (blob, nodeoffset, "mac-address", bd->bi_enetaddr,
+					sizeof (uchar) * 6);
 	if (ret < 0)
 		printf("ft_blob_update(): cannot set /soc/cpm/scc/mac-address "
-			"property err:%s\n", fdt_strerror(ret));
-	}
-	else {
+			"property err:%s\n", fdt_strerror (ret));
+	} else {
 		/* memory node is required in dts */
 		printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
-		"err:%s\n", fdt_strerror(nodeoffset));
+			"err:%s\n", fdt_strerror (nodeoffset));
 	}
 }

 void ft_board_setup(void *blob, bd_t *bd)
 {
-	ft_cpu_setup( blob, bd);
-	ft_blob_update(blob, bd);
+	ft_cpu_setup (blob, bd);
+	ft_blob_update (blob, bd);
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index 7a80dad..416e4db 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -359,18 +359,16 @@
 #define I2C_READ	i2c_soft_read_pin ()
 #define I2C_SDA(bit)	if(bit) { \
 				*(unsigned short *)(I2C_BASE_DIR) &=  ~SDA_CONF; \
-				} \
-			else    { \
+			} else { \
 				*(unsigned char *)(I2C_BASE_PORT) &= ~SDA_BIT; \
 				*(unsigned short *)(I2C_BASE_DIR) |= SDA_CONF; \
-				}
+			}
 #define I2C_SCL(bit)	if(bit) { \
 				*(unsigned short *)(I2C_BASE_DIR) &=  ~SCL_CONF; \
-				} \
-			else    { \
+			} else { \
 				*(unsigned char *)(I2C_BASE_PORT) &= ~SCL_BIT; \
 				*(unsigned short *)(I2C_BASE_DIR) |= SCL_CONF; \
-				}
+			}
 #define I2C_DELAY	udelay(50)	/* 1/4 I2C clock duration */

 #define CONFIG_I2C_MULTI_BUS	1
-- 
1.5.6.1

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [POWERPC] mgsuvd: fix codingstyle

[Wolfgang Denk]

Dear Heiko Schocher,

In message <48F865A9.1020501@denx.de> you wrote:
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
>  board/keymile/mgsuvd/mgsuvd.c |   67 +++++++++++++++++-----------------------
>  include/configs/mgsuvd.h      |   10 ++----
>  2 files changed, 33 insertions(+), 44 deletions(-)

Applied to "next" branch.

Note 1: Heiko, it's "coding style" or "Coding Style", but not
	"codingstyle"

Note 2:

> +	nodeoffset = fdt_path_offset (blob, "/memory");
> +	if (nodeoffset >= 0) {
> +		ret = fdt_setprop (blob, nodeoffset, "reg", memory_data,
> +					sizeof (memory_data));
>  		if (ret < 0)
>  			printf("ft_blob_update(): cannot set /memory/reg "
> -				"property err:%s\n", fdt_strerror(ret));
> -		}
> -		else {
> +				"property err:%s\n", fdt_strerror (ret));
> +		} else {
>  			/* memory node is required in dts */
>  			printf("ft_blob_update(): cannot find /memory node "
> -			"err:%s\n", fdt_strerror(nodeoffset));
> +				"err:%s\n", fdt_strerror (nodeoffset));

You really want to turn the 4 repetitions of the very same code  into
a function.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always borrow money from a pessimist; they don't expect  to  be  paid
back.