[U-Boot] [U-Boot-Users] Compilation problem for TI3430 board.

[Jerry Van Baren <gerald.vanbaren@ge.com>]

Hi Radha,

Please don't top post.

Radha Krishna wrote:
> Hi GVB,
> You are right. Could you tell me the solution.

Don't use DOS (aka Windows).

Since you already have a problem there, you can use "dos2unix" or 
equivalent.  If you feel you must use Windows, many Windows editors 
(e.g. UltraEdit) allow you to control/convert line endings.

> Best Regards,
> Kris.

[snip]

>>> $ make CROSS_COMPILE=arm-none-linux-gnueabi-
>> omap3430sdp_config
>>> ./mkconfig: line 2: $'\r': command not
>> found
>>> make: *** [omap3430sdp_config] Error 127
>> Is that telling you that you have DOS line endings
>> (<CR>+<LF> i.e. \r\n) 
>> as opposed to unix line endings (\n only)?
>>
>>> $ make CROSS_COMPILE=arm-none-linux-gnueabi-
>>> System not configured - see README
>>> make: *** [all] Error 1
>>>
>>>    Could somebody tell me steps to compile U-Boot for
>>>  TI3430.
>>>    
>>>    Best Regards,
>>>    Krishna.
>> My best guess,
>> gvb

HTH,
gvb