[U-Boot] [PATCH] lcd: print custom strings after the logo

[Ilko Iliev <iliev@ronetix.at>]

Hello Stelian,

Stelian Pop wrote:
> Le mardi 21 octobre 2008 ? 15:10 +0200, Ilko Iliev a ?crit :
>   
>> This patch allows to print custom strings on the LCD after the logo.
>>     
>
> Hi Ilko,
>
>   
>> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
>>
>> index d104b26..a94a4da 100644
>> --- a/common/lcd.c
>> +++ b/common/lcd.c
>> @@ -827,11 +827,19 @@ static void *lcd_logo (void)
>>         sprintf (info, "%s", U_BOOT_VERSION);
>>         lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
>>
>> -       sprintf (info, "(C) 2008 ATMEL Corp");
>> +#ifndef CONFIG_LCD_LOGO_TEXT1
>> +# define CONFIG_LCD_LOGO_TEXT1 "(C) 2008 ATMEL Corp"
>> +#endif
>>     
>
> Wouldn't it be better if we move this text into
> include/configs/at91xxx.h for all the boards ?
>   
Yes, it will be better.
Because I'm a newbie in the U-BOOT development I didn't want to make 
changes in all boards.

I have also other suggestions: see my email for the lowlevel_init.S

Do you know why the CPU registers are defined in this way:
#define AT91_PMC    (0xfffffc00 - AT91_BASE_SYS)

This is OK for a C-code, but for an assembler it is a problem because 
the following code gives an "Error: bad immediate value for offset":
    ldr     r1, =AT91_BASE_SYS
    ldr        r0, [r1, #AT91_PMC_MCKR]


regards,
Ilko Iliev