[U-Boot] [PATCH 5/5] lcd: Let the board code show board-specific info

[Anatolij Gustschin <agust@denx.de>]

Haavard Skinnemoen wrote:
> The information displayed when CONFIG_LCD_INFO is set is inherently
> board-specific, so it should be done by the board code. The current code
> dealing with this only handles two cases, and is already a horrible mess
> of #ifdeffery.
> 
> Yes, this duplicates some code, but it also allows boards to print more
> board-specific information; this used to be very difficult.
> 
> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
> ---
>  board/atmel/at91cap9adk/at91cap9adk.c     |   29 ++++++++++
>  board/atmel/at91sam9261ek/at91sam9261ek.c |   29 ++++++++++
>  board/atmel/at91sam9263ek/at91sam9263ek.c |   29 ++++++++++
>  board/atmel/at91sam9rlek/at91sam9rlek.c   |   29 ++++++++++
>  board/lwmon/lwmon.c                       |   29 ++++++++++
>  board/tqc/tqm8xx/tqm8xx.c                 |   26 +++++++++
>  common/lcd.c                              |   84 ++---------------------------
>  include/lcd.h                             |    2 +
>  8 files changed, 178 insertions(+), 79 deletions(-)

Jean-Christophe, you ACKed this patch in
http://lists.denx.de/pipermail/u-boot/2008-October/042389.html.

Should it go through u-boot-video repository or do you intend to
pick it up?

Note that it needs some fixes:
s/CFG_MAX_NAND_DEVICE/CONFIG_SYS_MAX_NAND_DEVICE

Best regards,
Anatolij

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de