[U-Boot] Creating u-boot-arm-omap3 branch

[Dirk Behme <dirk.behme@googlemail.com>]

Dirk Behme wrote:
> 
> At IRC we had a short discussion what might be the best way how to go on 
> with OMAP3 patch series. We are now at version 5 of this patch set, 
> unfortunately there are still review comments open [1]. On the other 
> hand, from reviewer point of view, sending patch series again and again 
> (v6, v7, ...) would need always a complete re-review as reviewer can't 
> be sure that no new changes slipped into already reviewed patch parts.
> 
> Therefore, Jean-Christophe kindly offered to create an u-boot-arm-omap3 
> git branch with v5 patch set just sent.

http://git.denx.de/?p=u-boot/u-boot-arm.git;a=shortlog;h=refs/heads/omap3

Thanks to Jean-Christophe!

Dirk

> We see several advantages:
> 
> First, the patch set is more visible for people able to test and 
> hopefully willing to help sending patches. Second, only patches to fix 
> the open/new review results have to be send to the list and not whole 
> patch series. Third, this will avoid need for re-review of whole patch 
> series as only the (smaller) fixes have to be reviewed, not the whole 
> series again. And fourth, just in case I will disappear, the branch can 
> be just deleted if there is no progress to make it mainline ready (in 
> contrast to adding OMAP3 now to mainline and trusting that I will fix 
> the remaining issues in mainline).
> 
> Once we think that OMAP3 patch set in u-boot-arm-omap3 branch is ready 
> for mainline, it will be extracted (e.g. by git-rebase -i) and resend 
> for final inclusion/review to U-Boot list again. This will avoid git 
> pollution with "fix style here" "fix style there" commits.
> 
> Thanks for your patience and help, best regards
> 
> Dirk
> 
> [1] Review comments still open:
> 
> 1) Use readx/writex with base + offset with base being e.g. from 
> uint32_t. NAND driver gpmc_omap.c is already (hopefully correctly) 
> converted to this style and can be taken as example.
> 
> 2) For start.S, function cpu_init_crit():
> 
> cpu_init_crit: "why create function that could be call from c also"
> cpu_init_crit: "why create function that could be call from c also this 
> could be availlable for all cache/mmu/interruptions function"
> 
> Jean-Christophe likes that this code can be called from C, too.
> 
> 3) Replace all hard coded values with macros.
> 
> The main places I know are
> 
> - misc_init_r() in the board files (evm.c, overo.c, beagle.c)
> - dpll_param tables in lowlevel_init.S (to be done like core_dpll_param)
> - do_sdrc_init() in mem.c
> 
> x) Hopefully all other comments are already fixed. More review comments 
> are welcome
> 
> 
> 
>