[U-Boot] [PATCH 09/13 v5] ARM: OMAP3: Add I2C support

[dirk.behme at googlemail.com <dirk.behme@googlemail.com>]

Subject: [PATCH 09/13 v5] ARM: OMAP3: Add I2C support

From: Dirk Behme <dirk.behme@gmail.com>

Add I2C support

Signed-off-by: Dirk Behme <dirk.behme@gmail.com>

---
Changes in version v5:

- Split functional changes and coding style clean up as proposed by Jean-Christophe PLAGNIOL-VILLARD.

Changes in version v2:

- Remove SMC911X network init as proposed by Ben Warren. Thanks!

 drivers/i2c/Makefile       |    1 +
 drivers/i2c/omap24xx_i2c.c |   24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

Index: u-boot-main/drivers/i2c/Makefile
===================================================================
--- u-boot-main.orig/drivers/i2c/Makefile
+++ u-boot-main/drivers/i2c/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
+COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 
Index: u-boot-main/drivers/i2c/omap24xx_i2c.c
===================================================================
--- u-boot-main.orig/drivers/i2c/omap24xx_i2c.c
+++ u-boot-main/drivers/i2c/omap24xx_i2c.c
@@ -25,6 +25,8 @@
 #include <asm/arch/i2c.h>
 #include <asm/io.h>
 
+#define inb(a) __raw_readb(a)
+#define outb(a, v) __raw_writeb(a, v)
 #define inw(a) __raw_readw(a)
 #define outw(a,v) __raw_writew(a,v)
 
@@ -112,7 +114,11 @@ static int i2c_read_byte (u8 devaddr, u8
 
 		status = wait_for_pin ();
 		if (status & I2C_STAT_RRDY) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+			*value = inb(I2C_DATA);
+#else
 			*value = inw (I2C_DATA);
+#endif
 			udelay (20000);
 		} else {
 			i2c_error = 1;
@@ -153,8 +159,22 @@ static int i2c_write_byte (u8 devaddr, u
 	status = wait_for_pin ();
 
 	if (status & I2C_STAT_XRDY) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+		/* send out 1 byte */
+		outb(regoffset, I2C_DATA);
+		outw(I2C_STAT_XRDY, I2C_STAT);
+		status = wait_for_pin();
+		if ((status & I2C_STAT_XRDY)) {
+			/* send out next 1 byte */
+			outb(value, I2C_DATA);
+			outw(I2C_STAT_XRDY, I2C_STAT);
+		} else {
+			i2c_error = 1;
+		}
+#else
 		/* send out two bytes */
 		outw ((value << 8) + regoffset, I2C_DATA);
+#endif
 		/* must have enough delay to allow BB bit to go low */
 		udelay (50000);
 		if (inw (I2C_STAT) & I2C_STAT_NACK) {
@@ -191,7 +211,11 @@ static void flush_fifo(void)
 	while(1){
 		stat = inw(I2C_STAT);
 		if(stat == I2C_STAT_RRDY){
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+			inb(I2C_DATA);
+#else
 			inw(I2C_DATA);
+#endif
 			outw(I2C_STAT_RRDY,I2C_STAT);
 			udelay(1000);
 		}else