From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target
Date: Thu, 06 Nov 2008 15:06:37 -0600 [thread overview]
Message-ID: <49135C5D.2010309@freescale.com> (raw)
In-Reply-To: <1225998249-29301-1-git-send-email-becky.bruce@freescale.com>
Becky Bruce wrote:
> This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
>
> Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
> ---
> Makefile | 8 +++++++-
> 1 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 983a3cd..09e671d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2436,8 +2436,14 @@ TQM8560_config: unconfig
> MPC8610HPCD_config: unconfig
> @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
>
> +MPC8641HPCN_36BIT_config \
> MPC8641HPCN_config: unconfig
> - @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
> + @mkdir -p $(obj)include
> + @if [ "$(findstring _36BIT_,$@)" ] ; then \
> + echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
> + $(XECHO) "... enabling 36-bit physical addressing." ; \
> + fi
> + @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
>
> sbc8641d_config: unconfig
> @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
When would you ever not turn this on?
-Scott
next prev parent reply other threads:[~2008-11-06 21:06 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-05 20:55 [U-Boot] [PATCH 0/9] MPC8641 memory map changes/cleanup/36-bit Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 1/9] mpc8641: Remove extra "0" from BR2 define Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 2/9] mpc86xx: Move setup_bats into cpu_init_f Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 3/9] mpc8641: only define CONFIG_ENV_SIZE once Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 4/9] mpc8641: Drop imaginary second flash bank, map 8MB Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 5/9] mpc8641: make DIAG_ADDR == FLASH_BASE Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 6/9] mpc86xx: Use SRR0/1/rfi to enable address translation, not blr Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 7/9] mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map Becky Bruce
2008-11-05 20:55 ` [U-Boot] [PATCH 9/9] mpc8641: Support 36-bit physical addressing Becky Bruce
2008-11-05 21:42 ` Kumar Gala
2008-11-06 19:04 ` [U-Boot] [PATCH] toplevel Makefile: Add MPC8641HPCN_36BIT target Becky Bruce
2008-11-06 21:06 ` Scott Wood [this message]
2008-11-06 21:40 ` Becky Bruce
2008-11-06 21:59 ` Scott Wood
2008-11-06 22:07 ` Becky Bruce
2008-11-06 23:37 ` [U-Boot] [PATCH 9/9 V2] mpc8641: Support 36-bit physical addressing Becky Bruce
2008-11-06 19:28 ` [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map Scott Wood
2008-11-06 22:12 ` Becky Bruce
2008-11-06 22:16 ` Scott Wood
2008-11-06 22:24 ` Becky Bruce
2008-11-06 22:26 ` Scott Wood
2008-11-07 19:45 ` [U-Boot] [PATCH] mpc8641: Try to detect old .dts files Becky Bruce
2008-11-10 22:58 ` Scott Wood
2008-11-10 23:09 ` Becky Bruce
2008-11-06 22:30 ` [U-Boot] [PATCH 8/9] mpc8641: Change 32-bit memory map Jon Loeliger
2008-11-06 22:39 ` Becky Bruce
2008-11-06 23:36 ` [U-Boot] [PATCH 8/9 V2] " Becky Bruce
2008-11-06 20:04 ` [U-Boot] [PATCH 8/9] " Jon Loeliger
2008-11-06 22:14 ` Becky Bruce
2008-11-06 23:41 ` Becky Bruce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49135C5D.2010309@freescale.com \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox