[U-Boot] [PATCH 4/5] powerpc: keymile: Add a check for the PIGGY debug board

[Heiko Schocher <heiko.schocher@invitel.hu>]

Hello Ben,

Ben Warren wrote:
> Heiko Schocher wrote:
>   
>> Hello Ben
>>
>> Ben Warren wrote:
>>   
>>     
>>> Heiko Schocher wrote:
>>>   
>>>     
>>>       
>>>> Check the presence of the PIGGY on the keymile boards mgcoge,
>>>> mgsuvd and kmeter1. If the PIGGY is not present, dont register
>>>> this Ethernet device.
>>>>
>>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>>> ---
>>>>     
>>>>       
>>>>         
>>> This looks like useful stuff to have, but I'd prefer that you put the 
>>> check logic in board_eth_init() rather than adding to the individual 
>>> device drivers.  I know the 8260 SCC driver is the older style, which 
>>> precludes the use of board_eth_init, but I'll convert it if you're able 
>>> to test.
>>>   
>>>     
>>>       
>> Yes, I could test such a change for you, but hmm... I am not sure, if
>> board_eth_init () is the right place for my purpose.
>> I need for every Ethernet device a selection, if this device is present or
>> not.
>> Correct me if I am wrong, but it looks like board_eth_init ()
>> is not made for this purpose. (Ok, I can do a specific device init
>> in board_eth_init (), but then we must do something, that prevents
>> that the device is again initialized in eth_initialize () ...
>>
>>   
>>     
> board_eth_init() was introduced for exactly this sort of thing.  Have a 
> look at the net repo (I've sent a pull request to Wolfgang so the 
> current changes will make it into the 12.2008 release).  There aren't 
> any device initializations left in eth_initialize(), so there's no issue 
> of a device being initialized twice.  The goal is for all devices to be 
> started by cpu_eth_int() or board_eth_init().
>   

Ahh... now I see it. I adjust my patch, thanks.

bye
Heiko