From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marco Stornelli Date: Wed, 19 Nov 2008 09:07:33 +0100 Subject: [U-Boot] Simple question about the TEXT_BASE In-Reply-To: References: Message-ID: <4923C945.8060309@coritel.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de TEXT_BASE is, in a general and coarse way, the address where the Uboot starts from the flash. For ARM architecture, instead, it's the relocation address, i.e. the ram address where the uboot relocates itself. Chengzhi Li ha scritto: > Hi everyone: > I am a freshman in the embedded development area. I have a simple > question about the TEXT_BASE. When I port the Das U-Boot to my S3C2440 > board, I found that the TEXT_BASE equal to 0x33F8000 which is seen in the > u-boot-xxx/board/smdk2410/config.mk. I want to know the function of this > value and why this one be 0x33F8000. And, is this one changeable.Thanks for > your kindly help! I am looking forward to your response! > > Yours Lee > > > > ------------------------------------------------------------------------ > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot -- Marco Stornelli Embedded Software Engineer CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni http://www.coritel.it marco.stornelli at coritel.it +39 06 72582838