[U-Boot] [PATCH 0/4 v3] powerpc: 83xx: add support for the 8360 based kmeter1 board.

[U-Boot] [PATCH 0/4 v3] powerpc: 83xx: add support for the 8360 based kmeter1 board.

[Heiko Schocher]

This patch series adds support for the keymile board kmeter1
based on a MPC8360 CPU from freescale.

The patches 1/4 - 2/4 are adding the basic support for this
board. The patches 3/4 and 4/4 do some cleanups for the
keymile boards.

changes since v2:

- [PATCH 1/4 v3] powerpc:  net: support for the SMSC LAN8700 PHY
  added comments from Kim Philips

- [PATCH 2/5 v2] powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
  aplied to "u-boot-mpc83xx master" -> no longer in this patch series

- [PATCH 2/4 v3] powerpc: 83xx: add support for the kmeter1 board
  added comments from Kim Philips
  added doc/README.kmeter1

- [PATCH 3/4 v3] powerpc: keymile: Add a check for the PIGGY debug board
  added comments from Ben Warren

- [PATCH 4/4 v3] powerpc, keymile boards: extract identical config options
  just rebased

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 0/4 v3] powerpc: 83xx: add support for the 8360 based kmeter1 board.

[Kim Phillips]

On Thu, 20 Nov 2008 09:56:25 +0100
Heiko Schocher <hs@denx.de> wrote:

> This patch series adds support for the keymile board kmeter1
> based on a MPC8360 CPU from freescale.
> 
> The patches 1/4 - 2/4 are adding the basic support for this
> board. The patches 3/4 and 4/4 do some cleanups for the
> keymile boards.
> 
> changes since v2:
> 
> - [PATCH 1/4 v3] powerpc:  net: support for the SMSC LAN8700 PHY
>   added comments from Kim Philips

applied 2, v4 of 3, and 4/4 to u-boot-mpc83xx.git next branch.

left 1/4 for Ben.

Thanks everyone,

Kim