public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jens Gehrlein <sew_s@tqs.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mpc83xx: Size optimization of start.S
Date: Tue, 16 Dec 2008 08:58:03 +0100	[thread overview]
Message-ID: <49475F8B.1090502@tqs.de> (raw)
In-Reply-To: <20081215170055.GA30730@ld0162-tx32.am.freescale.net>

Hi Scott,

Scott Wood schrieb:
> On Mon, Dec 15, 2008 at 08:26:03AM +0100, Jens Gehrlein wrote:
>> Hi Ron,
>>
>> Ron Madrid schrieb:
>>> Currently there are in excess of 100 bytes located at the beginning of the image
>>> built by start.S that are not being utilized.
>> Hmmm, are you sure? What if someone designs a board, where the processor
>> shall load its reset configuration from a local bus EEPROM, e.g. the
>> same NOR-Flash containing the U-Boot image (CFG_RESET_SOURCE[0:2] =
>> 000b?
>>
>> Or did I misunderstand something?
> 
> That's covered by the _HRCW_TABLE_ENTRY lines earlier in the file.

I see. I understood Ron's comment as "first 100 hex bytes".
Thanks for the hint, Scott.

Kind regards,
Jens

  reply	other threads:[~2008-12-16  7:58 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-12 21:12 [U-Boot] [PATCH] mpc83xx: Size optimization of start.S Ron Madrid
2008-12-15  7:26 ` Jens Gehrlein
2008-12-15 17:00   ` Scott Wood
2008-12-16  7:58     ` Jens Gehrlein [this message]
2009-01-12 18:52 ` Ron Madrid
2009-01-22  0:55 ` Kim Phillips
2009-01-22 18:00   ` Ron Madrid
2009-01-22 18:37     ` Kim Phillips
2009-01-22 21:37       ` Ron Madrid
2009-01-22 22:32         ` Kim Phillips

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49475F8B.1090502@tqs.de \
    --to=sew_s@tqs.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox