[U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support

[U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support

[Thomas Abraham]

This patch series adds Mentor Graphics USB OTG host controller 
driver support and MSC support for DM6446 (TI DaVinci) platform. 

- [PATCH 1/6] usb : musb : Add high speed field in usb_device structure.
- [PATCH 2/6] usb : musb : Adding host controller driver for Mentor USB controller.
- [PATCH 3/6] usb : musb : Adding USB VBUS enable functionality for DM6446 DVEVM.
- [PATCH 4/6] usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support.
- [PATCH 5/6] usb : musb : Enabling DM6446 (TI DaVinci) USB module power.
- [PATCH 6/6] usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform.

[U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support

[Dirk Behme]

Thomas,

Thomas Abraham wrote:
> This patch series adds Mentor Graphics USB OTG host controller 
> driver support and MSC support for DM6446 (TI DaVinci) platform. 

Any plans to support OMAP(3), too?

Best regards

Dirk

[U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support

[Subbrathnam, Swaminathan]

Dirk,
	OMAP patches are ready and will be submitted today.  Can we submit the OMAP patches in this list itself ? 

	I thought there is a different list acceptance of U-Boot OMAP patches.

Regards
swami

> -----Original Message-----
> From: Dirk Behme [mailto:dirk.behme at googlemail.com]
> Sent: Tuesday, December 16, 2008 6:23 PM
> To: Abraham, Thomas
> Cc: u-boot at lists.denx.de; Gupta, Ajay Kumar; Subbrathnam, Swaminathan; B,
> Ravi
> Subject: Re: [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver
> and enable Davinci MSC support
> 
> Thomas,
> 
> Thomas Abraham wrote:
> > This patch series adds Mentor Graphics USB OTG host controller
> > driver support and MSC support for DM6446 (TI DaVinci) platform.
> 
> Any plans to support OMAP(3), too?
> 
> Best regards
> 
> Dirk
> 

[U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver and enable Davinci MSC support

[Dirk Behme]

Subbrathnam, Swaminathan wrote:
> Dirk,
> 	OMAP patches are ready and will be submitted today.  Can we submit the OMAP patches in this list itself ? 

Yes, u-boot at lists.denx.de is the correct list for U-Boot OMAP(3) MUSB 
patches.

> 	I thought there is a different list acceptance of U-Boot OMAP patches.

We did coordination of OMAP3 clean up at some other lists/IRC. But now 
that the recent OMAP3 patches are at this list for review, this list 
is the right one for OMAP3 MUSB, too.

As OMAP3 patches are not in mainline, yet, I propose to do/test OMAP3 
U-Boot MUSB patches against OMAP3 v6 patch series

http://lists.denx.de/pipermail/u-boot/2008-December/044787.html

available by git from

http://www.sakoman.net/cgi-bin/gitweb.cgi?p=u-boot-omap3.git;a=shortlog;h=refs/heads/omap3-dev

Many thanks for your work!

Dirk

>>-----Original Message-----
>>From: Dirk Behme [mailto:dirk.behme at googlemail.com]
>>Sent: Tuesday, December 16, 2008 6:23 PM
>>To: Abraham, Thomas
>>Cc: u-boot at lists.denx.de; Gupta, Ajay Kumar; Subbrathnam, Swaminathan; B,
>>Ravi
>>Subject: Re: [U-Boot] [PATCH 0/6] usb : musb : Add MUSB contorller driver
>>and enable Davinci MSC support
>>
>>Thomas,
>>
>>Thomas Abraham wrote:
>>
>>>This patch series adds Mentor Graphics USB OTG host controller
>>>driver support and MSC support for DM6446 (TI DaVinci) platform.
>>
>>Any plans to support OMAP(3), too?
>>
>>Best regards
>>
>>Dirk
>>
> 
> 
>