From mboxrd@z Thu Jan  1 00:00:00 1970
From: michael <trimarchi@gandalf.sssup.it>
Date: Wed, 17 Dec 2008 13:45:52 +0100
Subject: [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1
In-Reply-To: <gi9cuq$3g1$1@ger.gmane.org>
References: <49384718.RDeSlY+9Cb0AIN+u%stefan.althoefer@web.de>	<493846e5.IKdOHwF2kDjrnHN0%stefan.althoefer@web.de>	<20081216215809.GJ24266@game.jcrosoft.org>
	<gi9cuq$3g1$1@ger.gmane.org>
Message-ID: <4948F480.6040000@gandalf.sssup.it>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Stefan Althoefer wrote:
> Jean-Christophe PLAGNIOL-VILLARD schrieb:
>
>   
>>> diff -uprN u-boot-orig//lib_arm/board.c u-boot/lib_arm/board.c
>>> --- u-boot-orig//lib_arm/board.c	2008-12-02 17:25:32.000000000 +0100
>>> +++ u-boot/lib_arm/board.c	2008-12-02 23:29:36.000000000 +0100
>>> @@ -441,6 +441,11 @@ extern void davinci_eth_set_mac_addr (co
>>>  	}
>>>  #endif
>>>  
>>> +#if defined(CONFIG_CMD_IDE)
>>> +        puts("IDE:   ");
>>> +        ide_init();
>>> +#endif /* CONFIG_CMD_IDE */
>>>       
>> are you sure it will work?
>>
>> Best Regards,
>> J.
>>     
>
> On my board (Janz emPC-A400 with IXP425) it does. With some more
> patches to add IDE to this board.
>
> What is your doubt?
>
> If you see problems, drop this. I can also add IDE to board_late_init().
>   
I don't sure if the outsw/insw are implemented in arm.

Regards Michael