[U-Boot] Reg. working with uboot

[michael <trimarchi@gandalf.sssup.it>]

Hi,

Vanee S wrote:
> Hi,
> im new to uboot. i need to know what software are required to incorporate
> uboot for hardware based on ARM architecture. it would be great if i can get
> the step by step procedure to incorporate uboot. what is the use of ELDK?
If you only add a new board, this is very easy and doesn't require a lot 
of work. Maybe
if you want to support particular peripherals that are not included in 
u-boot support you must
write codes. A good starting point is a board that is quite similar to 
your board and try to
support the console first and the relocation process (so the sdram). 
When the console and the
relocation code are ok, you are quite near the end.

> what are the files that needs to be customized and how to get the
> information required?
>
I think the best information is the code and the mailing list and all 
the documentation that
you can find in denx site.
> Regards,
> S. Vanee
>
Regards Michael