[U-Boot] RV: Question about U-Boot for MPC5121

[U-Boot] RV: Question about U-Boot for MPC5121

[Marco Donadio]

Good morning,

 

our team is working on a new telematic platform using MPC5121 device. Our Boar has some features of ADS512101 evaluacion board.

We are not familiar with boot loader system because it's the first time that we develop a board based on operating system.

We need some basic help to put boot loader in our architecture; we start with files in the directory "u-boot-2008.10":

- please can you tell us wich files we need to change (in order to adapt them to our architecture)??

- Whic files we need to compile in order to have a u-boot image???

 

We read all the documentation on the DENX website but without success...

 

Thanks a lot for your help

 

Best regards

 

 

Marco Donadio

 

GMV-FICOSA

mdonadio at gmv.com <mailto:vijimenez@gmv.com> 

_____________________________

MASISCONVI, S.A.
C/ Mas Dorca, 13, nave 5 
Pol?gono Industrial L'Ametlla Park 
08480 L'Ametlla del Vall?s (Barcelona) 
Tel.: +34 93 845 79 00 - +34 93 845 79 10 
Fax.: +34 93 845 79 05

P Save a tree...please don't print this e-mail unless you really need to

 

 


______________________
Este mensaje, y en su caso, cualquier fichero anexo al mismo,
 puede contener informacion clasificada por su emisor como confidencial
 en el marco de su Sistema de Gestion de Seguridad de la 
Informacion siendo para uso exclusivo del destinatario, quedando 
prohibida su divulgacion copia o distribucion a terceros sin la 
autorizacion expresa del remitente. Si Vd. ha recibido este mensaje 
 erroneamente, se ruega lo notifique al remitente y proceda a su borrado. 
Gracias por su colaboracion.
______________________
This message including any attachments may contain confidential 
information, according to our Information Security Management System,
 and intended solely for a specific individual to whom they are addressed.
 Any unauthorised copy, disclosure or distribution of this message
 is strictly forbidden. If you have received this transmission in error,
 please notify the sender immediately and delete it.
______________________

[U-Boot] RV: Question about U-Boot for MPC5121

[Jerry Van Baren]

Marco Donadio wrote:
> Good morning,
> 
> our team is working on a new telematic platform using MPC5121 device.
> Our Boar has some features of ADS512101 evaluacion board.

Good.  You have a starting point.

> We are not familiar with boot loader system because it's the first
> time that we develop a board based on operating system.
> 
> We need some basic help to put boot loader in our architecture; we
> start with files in the directory "u-boot-2008.10":

Good.

> - please can you tell us wich files we need to change (in order to
> adapt them to our architecture)??

Sorry, no.  There is a ads5121 board already in u-boot, I presume that 
is what you are "like."  You need to create your new board by copying 
your "like" board and then find and change whatever is not "like".  Only 
you know what is different, so only you can do this.

grep is your friend.

Start with Makefile in the top level directory, look at include/configs 
at the ads5121.h config, look in the board subdirectory.

> - Whic files we need to compile in order to have a u-boot image???

Start by building a known board, e.g.
   make ads5121_rev2_config
   make

Make your changes (create a new board).  Build and test it until it 
works.  It really is pretty easy.

> We read all the documentation on the DENX website but without success...

:-) You need to get your hands dirty now.

Read the README file in the top level directory.

> Thanks a lot for your help
> Best regards
> Marco Donadio

Good luck,
gvb