* [U-Boot] [RFC/PATCH 3/4] Add support for TQM-specific chip select logic to UPM-FSL
@ 2009-01-07 18:57 Wolfgang Grandegger
0 siblings, 0 replies; only message in thread
From: Wolfgang Grandegger @ 2009-01-07 18:57 UTC (permalink / raw)
To: u-boot
For the NAND chips on the TQM8548 modules, a special chip-select logic is
used. It uses dedicated address lines to be controlled via UPM machine
address register (mar). This patch adds corresponding support to the
FSL-UPM driver.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
---
drivers/mtd/nand/fsl_upm.c | 5 ++++-
include/linux/mtd/fsl_upm.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
Index: u-boot/drivers/mtd/nand/fsl_upm.c
===================================================================
--- u-boot.orig/drivers/mtd/nand/fsl_upm.c
+++ u-boot/drivers/mtd/nand/fsl_upm.c
@@ -90,8 +90,11 @@ static void fun_cmd_ctrl(struct mtd_info
mar = cmd << (32 - fun->width);
io_addr = fun->upm.io_addr;
#if NAND_MAX_CHIPS > 1
- if (fun->chip_nr > 0)
+ if (fun->chip_nr > 0) {
io_addr += fun->chip_offset * fun->chip_nr;
+ if (fun->upm_mar_chip_offset)
+ mar |= fun->upm_mar_chip_offset * fun->chip_nr;
+ }
#endif
fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
Index: u-boot/include/linux/mtd/fsl_upm.h
===================================================================
--- u-boot.orig/include/linux/mtd/fsl_upm.h
+++ u-boot/include/linux/mtd/fsl_upm.h
@@ -28,6 +28,7 @@ struct fsl_upm_nand {
int width;
int upm_cmd_offset;
int upm_addr_offset;
+ int upm_mar_chip_offset;
int wait_pattern;
int (*dev_ready)(int chip_nr);
int chip_delay;
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-01-07 18:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-07 18:57 [U-Boot] [RFC/PATCH 3/4] Add support for TQM-specific chip select logic to UPM-FSL Wolfgang Grandegger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox