From: Wolfgang Grandegger <wg@grandegger.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC/PATCH 4/4] Add multi-chip NAND support for the TQM8548 modules
Date: Wed, 07 Jan 2009 19:58:52 +0100 [thread overview]
Message-ID: <4964FB6C.3060305@grandegger.com> (raw)
This patches configures the NAND UPM-FSL driver with multi-chip support
for the Micro MT29F8G08FAB on the TQM8548 modules.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
---
board/tqc/tqm85xx/nand.c | 2 ++
include/configs/TQM85xx.h | 4 ++--
2 files changed, 4 insertions(+), 2 deletions(-)
Index: u-boot/board/tqc/tqm85xx/nand.c
===================================================================
--- u-boot.orig/board/tqc/tqm85xx/nand.c
+++ u-boot/board/tqc/tqm85xx/nand.c
@@ -446,6 +446,8 @@ static struct fsl_upm_nand fun = {
.width = 8,
.upm_cmd_offset = 0x08,
.upm_addr_offset = 0x10,
+ .upm_mar_chip_offset = CONFIG_SYS_NAND_CS_DIST,
+ .chip_offset = CONFIG_SYS_NAND_CS_DIST,
.chip_delay = NAND_BIG_DELAY_US,
};
Index: u-boot/include/configs/TQM85xx.h
===================================================================
--- u-boot.orig/include/configs/TQM85xx.h
+++ u-boot/include/configs/TQM85xx.h
@@ -362,8 +362,8 @@
#define CONFIG_SYS_NAND2_BASE (CONFIG_SYS_NAND1_BASE + CONFIG_SYS_NAND_CS_DIST)
#define CONFIG_SYS_NAND3_BASE (CONFIG_SYS_NAND2_BASE + CONFIG_SYS_NAND_CS_DIST)
-#define CONFIG_SYS_MAX_NAND_DEVICE 2 /* Max number of NAND devices */
-#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 2
#if (CONFIG_SYS_MAX_NAND_DEVICE == 1)
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE }
reply other threads:[~2009-01-07 18:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4964FB6C.3060305@grandegger.com \
--to=wg@grandegger.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox