[U-Boot] u-boot and xupv2p problem

[U-Boot] u-boot and xupv2p problem

[xavier vvv]

Hi all,

I want to install u-boot on the xupv2p board embedding a ppc405 processor.

I have some questions before doing this:


1. Which configuration do I have to use:

make ml300_config or

make xupv2p_config



2. Do I have to change the ~/u-boot/board/xilinx/ml300/xparameters.h file

in accordance to informations generated by EDK.



Thanks

[U-Boot] u-boot and xupv2p problem

[xavier vvv]

Hi all,

I want to install u-boot on the xupv2p board embedding a ppc405 processor.

I have some questions before doing this:


1. Which configuration do I have to use:

make ml300_config or

make xupv2p_config



2. Do I have to change the ~/u-boot/board/xilinx/ml300/xparameters.h file

in accordance to informations generated by EDK.



Thanks

[U-Boot] u-boot and xupv2p problem

[Michal Simek]

Hi Xavier,

> Hi all,

First of all - do not send your messages twice.
> 
> I want to install u-boot on the xupv2p board embedding a ppc405 processor.
> 
> I have some questions before doing this:
> 
> 
> 1. Which configuration do I have to use:
> 
> make ml300_config or
> 
> make xupv2p_config
> 
> 
If is xupv2p_config available you use old version. Please update to latest version.
xupv2p board was for Microblaze CPU. ml300 is the right starting platform for you.

> 
> 2. Do I have to change the ~/u-boot/board/xilinx/ml300/xparameters.h file
> 
> in accordance to informations generated by EDK.

:-) EDK generate a lot of information. It depends on your design. But IMHO in
99,9% you have to change it. There is generic ppc405 platform too.

Regards,
Michal


> 
> 
> 
> Thanks
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot