From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <monstr@seznam.cz>
Date: Fri, 09 Jan 2009 08:30:54 +0100
Subject: [U-Boot] u-boot and xupv2p problem
In-Reply-To: <a15a30020901081009ub010ac0wa08b878fd76d95fe@mail.gmail.com>
References: <a15a30020901081009ub010ac0wa08b878fd76d95fe@mail.gmail.com>
Message-ID: <4966FD2E.5030705@seznam.cz>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Xavier,

> Hi all,

First of all - do not send your messages twice.
> 
> I want to install u-boot on the xupv2p board embedding a ppc405 processor.
> 
> I have some questions before doing this:
> 
> 
> 1. Which configuration do I have to use:
> 
> make ml300_config or
> 
> make xupv2p_config
> 
> 
If is xupv2p_config available you use old version. Please update to latest version.
xupv2p board was for Microblaze CPU. ml300 is the right starting platform for you.

> 
> 2. Do I have to change the ~/u-boot/board/xilinx/ml300/xparameters.h file
> 
> in accordance to informations generated by EDK.

:-) EDK generate a lot of information. It depends on your design. But IMHO in
99,9% you have to change it. There is generic ppc405 platform too.

Regards,
Michal


> 
> 
> 
> Thanks
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot