From: Amandeep Bhullar <abhullar@techlinkentertainment.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] u-boot for ARM
Date: Fri, 23 Jan 2009 11:38:08 -0400 [thread overview]
Message-ID: <4979E460.7030700@techlinkentertainment.com> (raw)
Hello All,
I have an Atmel AT91SAM9263 evaluation board with an arm926ejs based
processor. I want to configure U-boot for this and want to have a USB
device boot option available too. Though the U-boot will be in NAND
Flash but i want the board to boot from a USB device like a USB Flash
drive etc.
I was reading the README and it talks about configuring a large number
of options. Where do I define these options? In which file?
if i just give the command
$ make arm926ejs_config
if comes with a message
make: *** No rule to make target 'arm926ejs_config'. Stop.
Can anybody help me in how to obtain a .bin file for my processor that i
can load in NANDFlash and use this U-boot.
Many Thanks
Aman.
next reply other threads:[~2009-01-23 15:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-23 15:38 Amandeep Bhullar [this message]
2009-01-24 1:54 ` [U-Boot] u-boot for ARM Roman Mashak
[not found] ` <8c09713c0901231814k3e41acfck3bb3de282dbee6c5@mail.gmail.com>
2009-01-24 9:23 ` Roman Mashak
2009-01-24 20:38 ` Pink Boy
2009-02-11 19:33 ` [U-Boot] Loading Linux Image on AT91SAM9263-EK Amandeep Bhullar
2009-01-25 9:06 ` [U-Boot] u-boot for ARM Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4979E460.7030700@techlinkentertainment.com \
--to=abhullar@techlinkentertainment.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox