* [U-Boot] [PATCH 12/31] 82xx, mgcoge: corrected wrong flash sizes
@ 2009-01-28 9:39 Heiko Schocher
2009-01-28 12:01 ` Wolfgang Denk
0 siblings, 1 reply; 3+ messages in thread
From: Heiko Schocher @ 2009-01-28 9:39 UTC (permalink / raw)
To: u-boot
flash size of mgcoge corrected
boot to 4M (was 32)
cfg to 32M (was 64)
Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
---
include/configs/mgcoge.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index a754f0b..f307382 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -99,14 +99,14 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_SIZE 32
+#define CONFIG_SYS_FLASH_SIZE 4
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CONFIG_SYS_FLASH_BASE_1 0x50000000
-#define CONFIG_SYS_FLASH_SIZE_1 64
+#define CONFIG_SYS_FLASH_SIZE_1 32
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_1 }
--
1.6.0.6
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH 12/31] 82xx, mgcoge: corrected wrong flash sizes
2009-01-28 9:39 [U-Boot] [PATCH 12/31] 82xx, mgcoge: corrected wrong flash sizes Heiko Schocher
@ 2009-01-28 12:01 ` Wolfgang Denk
2009-01-28 12:54 ` Heiko Schocher
0 siblings, 1 reply; 3+ messages in thread
From: Wolfgang Denk @ 2009-01-28 12:01 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <498027D6.3070600@denx.de> you wrote:
> flash size of mgcoge corrected
> boot to 4M (was 32)
> cfg to 32M (was 64)
>
> Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> include/configs/mgcoge.h | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
> index a754f0b..f307382 100644
> --- a/include/configs/mgcoge.h
> +++ b/include/configs/mgcoge.h
> @@ -99,14 +99,14 @@
>
> #define CONFIG_SYS_SDRAM_BASE 0x00000000
> #define CONFIG_SYS_FLASH_BASE 0xFE000000
> -#define CONFIG_SYS_FLASH_SIZE 32
> +#define CONFIG_SYS_FLASH_SIZE 4
That's broken. The flash size should never be defined. Why don;t you
use auto-detection as U-Boot was designed for?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"You know, after a woman's raised a family and so on, she wants to
start living her own life." "Whose life she's _been_ living, then?"
- Terry Pratchett, _Witches Abroad_
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH 12/31] 82xx, mgcoge: corrected wrong flash sizes
2009-01-28 12:01 ` Wolfgang Denk
@ 2009-01-28 12:54 ` Heiko Schocher
0 siblings, 0 replies; 3+ messages in thread
From: Heiko Schocher @ 2009-01-28 12:54 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
Wolfgang Denk wrote:
> In message <498027D6.3070600@denx.de> you wrote:
>> flash size of mgcoge corrected
>> boot to 4M (was 32)
>> cfg to 32M (was 64)
>>
>> Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> ---
>> include/configs/mgcoge.h | 4 ++--
>> 1 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
>> index a754f0b..f307382 100644
>> --- a/include/configs/mgcoge.h
>> +++ b/include/configs/mgcoge.h
>> @@ -99,14 +99,14 @@
>>
>> #define CONFIG_SYS_SDRAM_BASE 0x00000000
>> #define CONFIG_SYS_FLASH_BASE 0xFE000000
>> -#define CONFIG_SYS_FLASH_SIZE 32
>> +#define CONFIG_SYS_FLASH_SIZE 4
>
> That's broken. The flash size should never be defined. Why don;t you
> use auto-detection as U-Boot was designed for?
I use the CFI driver ... have to check for what this defines are
used (Hopefully they are no more used).
Argh... i used it.
I change this.
thanks
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-01-28 12:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-28 9:39 [U-Boot] [PATCH 12/31] 82xx, mgcoge: corrected wrong flash sizes Heiko Schocher
2009-01-28 12:01 ` Wolfgang Denk
2009-01-28 12:54 ` Heiko Schocher
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox