From: Ben Warren <biggerbadderben@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/27] Blackfin: bfin_mac: use common debug()
Date: Wed, 28 Jan 2009 21:51:22 -0800 [thread overview]
Message-ID: <498143DA.9050809@gmail.com> (raw)
In-Reply-To: <1233187416-22378-6-git-send-email-vapier@gentoo.org>
Mike Frysinger wrote:
> Rather then defining our own DEBUGF(), just use the common debug().
>
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
> CC: Ben Warren <biggerbadderben@gmail.com>
>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
> ---
> drivers/net/bfin_mac.c | 14 +++-----------
> 1 files changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
> index b875937..c14b561 100644
> --- a/drivers/net/bfin_mac.c
> +++ b/drivers/net/bfin_mac.c
> @@ -33,14 +33,6 @@
> #include <post.h>
> #endif
>
> -#undef DEBUG_ETHERNET
> -
> -#ifdef DEBUG_ETHERNET
> -#define DEBUGF(fmt, args...) printf(fmt, ##args)
> -#else
> -#define DEBUGF(fmt, args...)
> -#endif
> -
> #define RXBUF_BASE_ADDR 0xFF900000
> #define TXBUF_BASE_ADDR 0xFF800000
> #define TX_BUF_CNT 1
> @@ -197,7 +189,7 @@ static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet,
> else
> txIdx++;
> out:
> - DEBUGF("BFIN EMAC send: length = %d\n", length);
> + debug("BFIN EMAC send: length = %d\n", length);
> return result;
> }
>
> @@ -342,7 +334,7 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
> u32 opmode;
> int dat;
> int i;
> - DEBUGF("Eth_init: ......\n");
> + debug("Eth_init: ......\n");
>
> txIdx = 0;
> rxIdx = 0;
> @@ -405,7 +397,7 @@ static int bfin_EMAC_init(struct eth_device *dev, bd_t *bd)
>
> static void bfin_EMAC_halt(struct eth_device *dev)
> {
> - DEBUGF("Eth_halt: ......\n");
> + debug("Eth_halt: ......\n");
> /* Turn off the EMAC */
> *pEMAC_OPMODE = 0x00000000;
> /* Turn off the EMAC RX DMA */
>
regards,
Ben
next prev parent reply other threads:[~2009-01-29 5:51 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 0:03 [U-Boot] [PATCH 00/27] Blackfin updates for 2009.03 (part 2) Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 01/27] Blackfin: bfin_mac: force board_get_enetaddr() usage Mike Frysinger
2009-01-29 5:43 ` Ben Warren
2009-01-29 5:53 ` Mike Frysinger
2009-01-29 6:01 ` Ben Warren
2009-01-29 6:16 ` Mike Frysinger
2009-01-29 6:20 ` Ben Warren
2009-01-29 10:43 ` Wolfgang Denk
2009-01-29 6:59 ` [U-Boot] [PATCH 01/27 v2] " Mike Frysinger
2009-01-29 7:53 ` Ben Warren
2009-01-29 10:45 ` Wolfgang Denk
2009-01-29 16:35 ` Mike Frysinger
2009-01-29 19:03 ` Wolfgang Denk
2009-01-29 20:25 ` Mike Frysinger
2009-01-29 20:41 ` Wolfgang Denk
2009-01-29 21:05 ` Mike Frysinger
2009-01-29 21:17 ` Wolfgang Denk
2009-01-29 21:48 ` Mike Frysinger
2009-01-29 22:18 ` Wolfgang Denk
2009-01-30 1:23 ` Mike Frysinger
2009-02-02 20:05 ` Mike Frysinger
2009-02-02 21:04 ` Wolfgang Denk
2009-02-03 0:37 ` Mike Frysinger
2009-02-03 8:16 ` Wolfgang Denk
2009-02-03 19:40 ` Mike Frysinger
2009-02-10 20:36 ` Mike Frysinger
2009-02-11 5:45 ` Ben Warren
2009-02-11 5:57 ` Mike Frysinger
2009-02-11 12:17 ` Wolfgang Denk
2009-02-11 19:25 ` Mike Frysinger
2009-02-11 20:15 ` Ben Warren
2009-02-12 1:29 ` Mike Frysinger
2009-02-12 6:24 ` Ben Warren
2009-02-12 6:30 ` Mike Frysinger
2009-02-12 7:33 ` Wolfgang Denk
2009-02-12 7:57 ` Mike Frysinger
2009-01-30 0:59 ` [U-Boot] [PATCH] net: new utility functions eth_{parse, {get, set}env}_enetaddr() Mike Frysinger
2009-01-30 1:09 ` [U-Boot] [PATCH 01/27 v3] Blackfin: bfin_mac: force boards to setup the MAC themselves Mike Frysinger
2009-01-30 1:09 ` [U-Boot] [PATCH] Blackfin: bf537-stamp: rewrite MAC-in-flash handling Mike Frysinger
2009-01-29 17:49 ` [U-Boot] [PATCH 01/27] Blackfin: bfin_mac: force board_get_enetaddr() usage Scott Wood
2009-01-29 10:30 ` Wolfgang Denk
2009-01-29 0:03 ` [U-Boot] [PATCH 02/27] Blackfin: bfin_mac: set MDCDIV based on SCLK Mike Frysinger
2009-01-29 5:46 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 03/27] Blackfin: bfin_mac: cleanup MII/PHY functions Mike Frysinger
2009-01-29 5:48 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 04/27] Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR, CLOCK_FREQ} Mike Frysinger
2009-01-29 5:50 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 05/27] Blackfin: bfin_mac: use common debug() Mike Frysinger
2009-01-29 5:51 ` Ben Warren [this message]
2009-01-29 0:03 ` [U-Boot] [PATCH 06/27] Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII Mike Frysinger
2009-01-29 6:03 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 07/27] Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues Mike Frysinger
2009-01-29 6:05 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 08/27] Blackfin: only build post code when CONFIG_POST Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 09/27] Blackfin: add driver for on-chip SPI controller Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 10/27] Blackfin: dont check baud if it wont actually get used Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 11/27] Blackfin: enable --gc-sections Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 12/27] Blackfin: cache core/system clock values Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 13/27] Blackfin: setup bi_enetaddr for single nets Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 14/27] Blackfin: rewrite cache handling functions Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 15/27] Blackfin: dma_memcpy(): fix random failures Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 16/27] Blackfin: only flag L1 instruction for DMA memcpy Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 17/27] Blackfin: use 8/16/32 bit transfer widths in dma_memcpy() Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 18/27] Blackfin: fix up EBIU defines Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 19/27] Blackfin: build with -mno-fdpic Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 20/27] Blackfin: add driver for on-chip NAND controller Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 21/27] Blackfin: add driver for on-chip ATAPI controller Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 22/27] Blackfin: add port I bits Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 23/27] Blackfin: update asm-blackfin/posix_types.h to latest Linux version Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 24/27] Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 25/27] Blackfin: output booting source when booting Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 26/27] Blackfin: add port muxing for BF51x SPI Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 27/27] Blackfin: add driver for on-chip MMC/SD controller Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=498143DA.9050809@gmail.com \
--to=biggerbadderben@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox