From: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] MIPS: Fix compile warning in au1x00_eth.c
Date: Fri, 30 Jan 2009 09:27:23 +0900 [thread overview]
Message-ID: <4982496B.80607@necel.com> (raw)
In-Reply-To: <200901281737.36571.sr@denx.de>
Stefan Roese wrote:
>> skuribay at ubuntu:u-boot.git$ mips-linux-gnu-gcc --version
>> mips-linux-gnu-gcc (Sourcery G++ Lite 4.2-177) 4.2.3
>> Copyright (C) 2007 Free Software Foundation, Inc.
>> This is free software; see the source for copying conditions. There is NO
>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>
>> skuribay at ubuntu:u-boot.git$
>> skuribay at ubuntu:u-boot.git$ CROSS_COMPILE=mips-linux-gnu- ./MAKEALL
>> dbau1000 Configuring for dbau1x00 board...
>> au1x00_eth.c: In function 'au1x00_send':
>> au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards
>> qualifiers from pointer target type au1x00_eth.c: In function
>> 'au1x00_recv':
>> au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards
>> qualifiers from pointer target type au1x00_eth.c: In function
>> 'au1x00_init':
>> au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards
>> qualifiers from pointer target type au1x00_eth.c: In function
>> 'au1x00_recv':
>> au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards
>> qualifiers from pointer target type au1x00_eth.c: In function
>> 'au1x00_init':
>> au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards
>> qualifiers from pointer target type au1x00_eth.c: In function
>> 'au1x00_send':
>> au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards
>> qualifiers from pointer target type text data bss dec hex
>> filename
>> 118780 5264 20648 144692 23534 ./u-boot
>
> Those errors occur twice. Seems that you are compiling this file twice.
> Any idea why?
Probably it's due to the GCC 4.2.x minor version difference.
Googling[1][2] and playing for a while, I finally managed to quiet the
GCC with the following patch.
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index 6272a3a..c2c76ac 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -155,7 +155,7 @@ static int au1x00_send(struct eth_device* dev, volatile void *packet, int length
/* tx fifo should always be idle */
fifo_tx[next_tx].len = length;
- fifo_tx[next_tx].addr = (virt_to_phys(packet))|TX_DMA_ENABLE;
+ fifo_tx[next_tx].addr = (virt_to_phys((void *)(unsigned long)packet))|TX_DMA_ENABLE;
au_sync();
udelay(1);
@@ -208,7 +208,7 @@ static int au1x00_recv(struct eth_device* dev){
NetReceive(NetRxPackets[next_rx], length - 4);
}
- fifo_rx[next_rx].addr = (virt_to_phys(NetRxPackets[next_rx]))|RX_DMA_ENABLE;
+ fifo_rx[next_rx].addr = (virt_to_phys((void *)(unsigned long)NetRxPackets[next_rx]))|RX_DMA_ENABLE;
next_rx++;
if(next_rx>=NO_OF_FIFOS){
@@ -249,7 +249,7 @@ static int au1x00_init(struct eth_device* dev, bd_t * bd){
for(i=0;i<NO_OF_FIFOS;i++){
fifo_tx[i].len = 0;
fifo_tx[i].addr = virt_to_phys(&txbuf[0]);
- fifo_rx[i].addr = (virt_to_phys(NetRxPackets[i]))|RX_DMA_ENABLE;
+ fifo_rx[i].addr = (virt_to_phys((void *)(unsigned long)NetRxPackets[i]))|RX_DMA_ENABLE;
}
/* Put mac addr in little endian */
Well, what will we do? Are there any othrer desirable fixes?
[1] http://lists.denx.de/pipermail/u-boot/2008-December/044960.html
[PATCH 01/11] powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
[2] http://lkml.org/lkml/2009/1/27/67
Interestingly, this only happens with gcc-4.2; gcc <= 4.1 and gcc-4.3 are OK.
--
Shinya Kuribayashi
NEC Electronics
next prev parent reply other threads:[~2009-01-30 0:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-28 5:44 [U-Boot] [PATCH] MIPS: Fix compile warning in au1x00_eth.c Stefan Roese
2009-01-28 14:39 ` Shinya Kuribayashi
2009-01-28 16:37 ` Stefan Roese
2009-01-30 0:27 ` Shinya Kuribayashi [this message]
2009-01-30 10:22 ` Stefan Roese
2009-02-22 5:24 ` [U-Boot] MIPS: Fix GCC-4.2 'discards qualifiers from pointer target type' warnings Shinya Kuribayashi
2009-02-22 20:16 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4982496B.80607@necel.com \
--to=shinya.kuribayashi@necel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox