From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver
Date: Thu, 05 Feb 2009 15:50:23 +0100 [thread overview]
Message-ID: <498AFCAF.1040905@denx.de> (raw)
In-Reply-To: <Pine.LNX.4.64.0902051257540.5553@axis700.grange>
Hi Guennadi,
Guennadi Liakhovetski wrote:
> diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mx31_gpio.c
> new file mode 100644
> index 0000000..6487e63
> --- /dev/null
> +++ b/drivers/gpio/mx31_gpio.c
<snip>
> +#include <common.h>
> +#include <asm/arch/mx31.h>
> +#include <asm/arch/mx31-regs.h>
> +
> +/* GPIO port description */
> +static unsigned long gpio_ports[] = {
> + [0] = 0x53fcc000,
> + [1] = 0x53fd0000,
> + [2] = 0x53fa4000,
> +};
Ilya send a patch for mx31 GPIO register definitions today
http://lists.denx.de/pipermail/u-boot/2009-February/046884.html
Could you please provide additional patch for drivers/gpio/mx31_gpio.c
based on Ilya's patch to use these GPIOx_BASE macros here and to
use GPIO_DR / GPIO_GDIR for 0 / 4 below? Thanks!
> +void mx31_gpio_set(unsigned int gpio, unsigned int value)
> +{
> + unsigned int port = gpio >> 5;
> + u32 l;
> +
> + if (port > sizeof(gpio_ports) / sizeof(gpio_ports[0]) - 1)
also please change this one to
if (port >= ARRAY_SIZE(gpio_ports))
too, to be consistent with coding in this file, Thanks!
> + return;
> +
> + gpio &= 0x1f;
> +
> + l = __REG(gpio_ports[port] + 0);
> + if (value)
> + l |= 1 << gpio;
> + else
> + l &= ~(1 << gpio);
> + __REG(gpio_ports[port] + 0) = l;
> +}
> diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
> index 0552c27..e957d72 100644
> --- a/include/asm-arm/arch-mx31/mx31.h
> +++ b/include/asm-arm/arch-mx31/mx31.h
> @@ -27,4 +27,24 @@
> extern u32 mx31_get_ipg_clk(void);
> extern void mx31_gpio_mux(unsigned long mode);
>
> +enum mx31_gpio_direction {
> + MX31_GPIO_DIRECTION_IN,
> + MX31_GPIO_DIRECTION_OUT,
> +};
> +
> +#ifdef CONFIG_MX31_GPIO
> +extern int mx31_gpio_direction(unsigned int gpio,
> + enum mx31_gpio_direction direction);
________________________^^^^^^^
please remove spaces here, Thanks!
> +extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
> +#else
> +static inline int mx31_gpio_direction(unsigned int gpio,
> + enum mx31_gpio_direction direction)
________________________^^^^^^^
please remove spaces here too, Thanks!
Best regards,
Anatolij
next prev parent reply other threads:[~2009-02-05 14:50 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-04 16:59 [U-Boot] [PATCH 0/9] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-04 16:59 ` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-04 21:30 ` Wolfgang Denk
2009-02-04 21:42 ` Scott Wood
2009-02-04 22:00 ` Wolfgang Denk
2009-02-05 6:13 ` [U-Boot] MPC8548_eTSEC to Marvell 88E1145 E0 version Phy Initialization Ajeesh Kumar
2009-02-04 22:39 ` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 1:31 ` Mike Frysinger
2009-02-05 8:28 ` Guennadi Liakhovetski
2009-02-05 15:34 ` Mike Frysinger
2009-02-04 16:59 ` [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 19:54 ` Anatolij Gustschin
2009-02-04 20:41 ` Guennadi Liakhovetski
2009-02-04 22:44 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 16:59 ` [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-04 20:28 ` Anatolij Gustschin
2009-02-04 20:40 ` Guennadi Liakhovetski
2009-02-04 21:34 ` Wolfgang Denk
2009-02-04 22:25 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 10:03 ` Guennadi Liakhovetski
2009-02-04 16:59 ` [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 21:39 ` Wolfgang Denk
2009-02-04 21:38 ` Wolfgang Denk
2009-02-04 22:24 ` Guennadi Liakhovetski
2009-02-04 22:20 ` Anatolij Gustschin
2009-02-05 10:19 ` Guennadi Liakhovetski
2009-02-04 22:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 10:33 ` Guennadi Liakhovetski
2009-02-05 12:29 ` Wolfgang Denk
2009-02-04 16:59 ` [U-Boot] [PATCH 5/9] ARM: remove unused variable Guennadi Liakhovetski
2009-02-04 21:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:20 ` Guennadi Liakhovetski
2009-02-04 22:30 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 17:00 ` [U-Boot] [PATCH 6/9] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-04 22:01 ` Wolfgang Denk
2009-02-04 22:07 ` Guennadi Liakhovetski
2009-02-04 22:36 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:46 ` Anatolij Gustschin
2009-02-04 23:02 ` Anatolij Gustschin
2009-02-04 17:00 ` [U-Boot] [PATCH 7/9] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-04 22:45 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 17:00 ` [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 19:39 ` Guennadi Liakhovetski
2009-02-04 20:22 ` Magnus Lilja
2009-02-04 21:20 ` Wolfgang Denk
2009-02-04 17:00 ` [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-04 21:30 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:17 ` Guennadi Liakhovetski
2009-02-04 22:18 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:22 ` Wolfgang Denk
2009-02-05 10:51 ` Guennadi Liakhovetski
2009-02-05 12:31 ` [U-Boot] [PATCH 0/9 v2] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-05 12:31 ` [U-Boot] [PATCH 1/9 v2] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-05 14:50 ` Anatolij Gustschin [this message]
2009-02-05 15:24 ` Guennadi Liakhovetski
2009-02-05 16:07 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-05 16:32 ` Anatolij Gustschin
2009-02-05 16:44 ` Guennadi Liakhovetski
2009-02-05 17:22 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-05 16:42 ` Anatolij Gustschin
2009-02-05 16:46 ` Guennadi Liakhovetski
2009-02-06 0:19 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 5/9 v2] ARM: remove unused variable Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 6/9 v2] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 7/9 v2] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 8/9 v2] video: add a i.MX31 framebuffer driver Guennadi Liakhovetski
2009-02-06 0:27 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 9/9 v2] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-06 0:52 ` Anatolij Gustschin
2009-02-06 9:37 ` [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-06 9:37 ` [U-Boot] [PATCH 1/9 v3] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-06 21:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-06 21:27 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-23 10:58 ` Anatolij Gustschin
2009-02-24 3:07 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-24 4:59 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 3/9 v3] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-06 21:25 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-06 15:38 ` Anatolij Gustschin
2009-02-21 21:34 ` Wolfgang Denk
2009-02-23 13:13 ` Anatolij Gustschin
2009-02-23 21:39 ` Wolfgang Denk
2009-02-06 9:37 ` [U-Boot] [PATCH 5/9 v3] ARM: remove unused variable Guennadi Liakhovetski
2009-02-06 21:14 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 6/9 v3] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-06 15:42 ` Anatolij Gustschin
2009-02-06 9:37 ` [U-Boot] [PATCH 7/9 v3] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-06 16:14 ` Anatolij Gustschin
2009-02-06 16:23 ` Guennadi Liakhovetski
2009-02-06 9:37 ` [U-Boot] [PATCH 8/9 v3] video: add an i.MX31 framebuffer driver Guennadi Liakhovetski
2009-02-06 16:16 ` Anatolij Gustschin
2009-02-06 9:38 ` [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-06 21:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-23 12:20 ` Anatolij Gustschin
2009-02-23 12:34 ` [U-Boot] [PATCH 9/9 v4] " Guennadi Liakhovetski
2009-02-24 5:00 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-24 13:51 ` Anatolij Gustschin
2009-02-06 17:25 ` [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Anatolij Gustschin
2009-02-06 17:34 ` Guennadi Liakhovetski
2009-02-06 22:05 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=498AFCAF.1040905@denx.de \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox