* [U-Boot] lcd
@ 2009-02-07 5:44 Anusha Bhat
2009-02-07 6:12 ` Dirk Behme
2009-02-07 13:40 ` Nishanth Menon
0 siblings, 2 replies; 4+ messages in thread
From: Anusha Bhat @ 2009-02-07 5:44 UTC (permalink / raw)
To: u-boot
Hi,
How to add LCD SUPPORT (CONFIG_LCD) to opma3evm bootcode(u-boot).if i add
CONFIG_LCD in the omap3evm.h it gives error.
Because the display variables and funtions are not defined for omap.
I wanted to display a bmp logo on u-boot up
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] lcd
2009-02-07 5:44 [U-Boot] lcd Anusha Bhat
@ 2009-02-07 6:12 ` Dirk Behme
2009-02-07 13:40 ` Nishanth Menon
1 sibling, 0 replies; 4+ messages in thread
From: Dirk Behme @ 2009-02-07 6:12 UTC (permalink / raw)
To: u-boot
Anusha Bhat wrote:
> Hi,
> How to add LCD SUPPORT (CONFIG_LCD) to opma3evm bootcode(u-boot).if i add
> CONFIG_LCD in the omap3evm.h it gives error.
> Because the display variables and funtions are not defined for omap.
> I wanted to display a bmp logo on u-boot up
Why do you cross post to omap-linux?
Anyway, do you talk about splash screen? If yes, do you like to have a
look to (hackish, and therefore not in mainline) patch for Beagle?
http://groups.google.com/group/beagleboard/browse_thread/thread/3ad9b803a3418624
Regards
Dirk
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] lcd
2009-02-07 5:44 [U-Boot] lcd Anusha Bhat
2009-02-07 6:12 ` Dirk Behme
@ 2009-02-07 13:40 ` Nishanth Menon
1 sibling, 0 replies; 4+ messages in thread
From: Nishanth Menon @ 2009-02-07 13:40 UTC (permalink / raw)
To: u-boot
Anusha,
Anusha Bhat said the following on 02/06/2009 11:44 PM:
> How to add LCD SUPPORT (CONFIG_LCD) to opma3evm bootcode(u-boot).if i add
> CONFIG_LCD in the omap3evm.h it gives error.
> Because the display variables and funtions are not defined for omap.
> I wanted to display a bmp logo on u-boot up
>
yep, it is probably not supported in omap3 port in latest u-boot at the
moment. for OMAP3 DSS configuration code, look at [1] - you need to port
this code from the old u-boot to the latest u-boot.
This is a community development, so, we welcome any new features folks
can provide..
Regards,
Nishanth Menon
Ref:
[1]
http://beagleboard.googlecode.com/files/u-boot-beagle-rev2-trial2.tar.gz.gz
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] lcd
@ 2009-02-10 9:31 Anusha Bhat
0 siblings, 0 replies; 4+ messages in thread
From: Anusha Bhat @ 2009-02-10 9:31 UTC (permalink / raw)
To: u-boot
Hi,
How to add LCD(confog_lcd) support in omap3evm bootloader(u-boot)?
Thank u.
Ragards,
Anusha
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-02-10 9:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-07 5:44 [U-Boot] lcd Anusha Bhat
2009-02-07 6:12 ` Dirk Behme
2009-02-07 13:40 ` Nishanth Menon
-- strict thread matches above, loose matches on Subject: below --
2009-02-10 9:31 Anusha Bhat
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox