[U-Boot] support the Pentium M (Dothan) boot on U-boot?

[U-Boot] support the Pentium M (Dothan) boot on U-boot?

[Yongda Shin]

I will development the embedded system based on Intel Pentium M (Dothan).
On U-boot x86, it is support the pentium M (Dothan) CPU?

[U-Boot] support the Pentium M (Dothan) boot on U-boot?

[Graeme Russ]

Hi Yongda,

On Mon, Feb 9, 2009 at 5:15 PM, Yongda Shin <ertos12@i-winix.com> wrote:
> I will development the embedded system based on Intel Pentium M (Dothan).
> On U-boot x86, it is support the pentium M (Dothan) CPU?

U-Boot has generic x86 (486+) so there is no reason why it would not work
on a Pentium M CPU. I don't know if the Dothan has hyperthreading or dual
core, but the x86 port of U-Boot does not include multiple CPU support. I
doubt this will be a problem though, it will just use the first core

>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

[U-Boot] support the Pentium M (Dothan) boot on U-boot?

[Wolfgang Denk]

Dear Yongda Shin,

In message <498FC9EB.9080801@i-winix.com> you wrote:
> I will development the embedded system based on Intel Pentium M (Dothan).
> On U-boot x86, it is support the pentium M (Dothan) CPU?

Not yet, you have a lot of work in front of you when you attempt such
a port.

Good luck!

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"He was so narrow minded he could see through  a  keyhole  with  both
eyes ..."