[U-Boot] [PATCH 09/12] 8360, kmeter1: added bootcount feature.

Heiko Schocher
2009-02-11T18:26:27Z

add CONFIG_BOUTCOUNT_LIMIT feature for 8360 CPU.

The bootcounter uses 8 bytes from the muram,
because no other memory was found on this
CPU for the bootcount feature. So we must
correct the muram size in DTS before booting
Linux.

This feature is actual only implemented for
MPC8360, because not all 83xx CPU have qe,
and therefor no muram, which this feature
uses.

This patch also activate this option for
the kmeter1 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
---
cpu/mpc83xx/cpu.c | 34 ++++++++++++++++++++++++++++++++++
cpu/mpc83xx/fdt.c | 18 ++++++++++++++++++
2 files changed, 52 insertions(+), 0 deletions(-)

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 587fca3..df89411 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -34,6 +34,10 @@
#include <libfdt.h>
#include <tsec.h>
#include <netdev.h>
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+#include <asm/immap_qe.h>
+#include <asm/io.h>
+#endif

DECLARE_GLOBAL_DATA_PTR;

@@ -385,3 +389,33 @@ int cpu_eth_init(bd_t *bis)
#endif
return 0;
}
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+#if !defined(CONFIG_MPC8360)
+#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
+#endif
+
+#if !defined(CONFIG_BOOTCOUNT_ADDR)
+#define CONFIG_BOOTCOUNT_ADDR (0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
+#endif
+
+#include <asm/io.h>
+
+void bootcount_store (ulong a)
+{
+ void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
+ out_be32 (reg, a);
+ out_be32 (reg + 4, BOOTCOUNT_MAGIC);
+}
+
+ulong bootcount_load (void)
+{
+ void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
+
+ if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return in_be32 (reg);
+}
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index f890775..4cc9047 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -32,6 +32,20 @@ extern void ft_qe_setup(void *blob);

DECLARE_GLOBAL_DATA_PTR;

+#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
+#include <asm/immap_qe.h>
+
+void fdt_fixup_muram (void *blob)
+{
+ ulong data[2];
+
+ data[0] = 0;
+ data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
+ do_fixup_by_path(blob, "/qe/muram/data-only", "reg",
+ data, sizeof (data), 0);
+}
+#endif
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
@@ -83,4 +97,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#endif

fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_BOOTCOUNT_LIMIT)
+ fdt_fixup_muram (blob);
+#endif
}
--
1.6.0.6

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany