public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] MPC8548 CPU v2 errata
@ 2009-02-16 13:56 hendrik
  2009-02-16 16:07 ` Jens Gehrlein
  0 siblings, 1 reply; 4+ messages in thread
From: hendrik @ 2009-02-16 13:56 UTC (permalink / raw)
  To: u-boot

Hi all

could someone pls point me to where i can find documentation regarding 
changes and the implications there of between die Freescale mpc8548 v1 
and v2 silicone CPUs. I have searched Freescales website but only turned 
up errata concerning the reference manual:
Errata to MPC8548E PowerQUICC? III Integrated Host Processor Family 
Reference Manual, Rev. 2

thanks hendrik

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [U-Boot] MPC8548 CPU v2 errata
  2009-02-16 13:56 [U-Boot] MPC8548 CPU v2 errata hendrik
@ 2009-02-16 16:07 ` Jens Gehrlein
  2009-02-17  7:29   ` hendrik
  0 siblings, 1 reply; 4+ messages in thread
From: Jens Gehrlein @ 2009-02-16 16:07 UTC (permalink / raw)
  To: u-boot

Hi hendrik,

hendrik schrieb:
> Hi all
> 
> could someone pls point me to where i can find documentation regarding 
> changes and the implications there of between die Freescale mpc8548 v1 
> and v2 silicone CPUs. I have searched Freescales website but only turned 
> up errata concerning the reference manual:
> Errata to MPC8548E PowerQUICC? III Integrated Host Processor Family 
> Reference Manual, Rev. 2

There is also an errata sheet "MPC8458ECE Rev. 2" for the processor.
See Tab "Documentation" of MPC8548E.
On page 2 you will find a table of errata considering CPU 1.1 to 2.1

Kind regards,
Jens

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [U-Boot] MPC8548 CPU v2 errata
  2009-02-16 16:07 ` Jens Gehrlein
@ 2009-02-17  7:29   ` hendrik
  2009-02-17  8:23     ` Jens Gehrlein
  0 siblings, 1 reply; 4+ messages in thread
From: hendrik @ 2009-02-17  7:29 UTC (permalink / raw)
  To: u-boot

Jens Gehrlein wrote:
> Hi hendrik,
>
> hendrik schrieb:
>> Hi all
>>
>> could someone pls point me to where i can find documentation 
>> regarding changes and the implications there of between die Freescale 
>> mpc8548 v1 and v2 silicone CPUs. I have searched Freescales website 
>> but only turned up errata concerning the reference manual:
>> Errata to MPC8548E PowerQUICC? III Integrated Host Processor Family 
>> Reference Manual, Rev. 2
>
> There is also an errata sheet "MPC8458ECE Rev. 2" for the processor.
> See Tab "Documentation" of MPC8548E.
> On page 2 you will find a table of errata considering CPU 1.1 to 2.1
>
> Kind regards,
> Jens
>
Thank you Jens, I found "MPC8458ECE Rev. 2" but can not find a page 2 or 
errata considering CPU 1.1 to 2.1 is there another link to the document?

thanks hendrik

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [U-Boot] MPC8548 CPU v2 errata
  2009-02-17  7:29   ` hendrik
@ 2009-02-17  8:23     ` Jens Gehrlein
  0 siblings, 0 replies; 4+ messages in thread
From: Jens Gehrlein @ 2009-02-17  8:23 UTC (permalink / raw)
  To: u-boot

hendrik schrieb:

> Thank you Jens, I found "MPC8458ECE Rev. 2" but can not find a page 2 or 
> errata considering CPU 1.1 to 2.1 is there another link to the document?

Within this document, a very lengthy table 3, starting at page 2,
describes (hopefully ;-) ) all known errata. On the right side there are
five columns describing for which processor version each erratum
applies.

Please try this:
http://www.freescale.com/files/32bit/doc/errata/MPC8548ECE.pdf?fpsp=1&WT_TYPE=Errata&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation
This should open the PDF within your browser, if configured. Then you
can save the document to disk.

Kind regards,
Jens

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2009-02-17  8:23 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-16 13:56 [U-Boot] MPC8548 CPU v2 errata hendrik
2009-02-16 16:07 ` Jens Gehrlein
2009-02-17  7:29   ` hendrik
2009-02-17  8:23     ` Jens Gehrlein

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox