[U-Boot] Status open patches: 8xxx

[U-Boot] Status open patches: 8xxx

[Wolfgang Denk]

Dear Kim, Andy & Jon,

I have the following patches still marked as open in my list. Could
you please have a look... 

8xxx:
11/06 Anton Vorontsov    [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB
12/11 Paul Gortmaker     [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
12/30 Poonam_Aggrwal-b1  [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)
01/15 hamoshame Lamotek  [U-Boot] MPC8572DS Registered DDR2 support.
01/22 Pieter             [U-Boot] Custom MPC8548 boot using FDT problem
01/22 Scott Wood         Re: [U-Boot] mpc8313erdb: crash in image_print_type()
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound
02/04 Jon Loeliger       Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
02/05 Valeriy Glushkov   [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
02/10 "Ajeesh Kumar"     U-boot level MPC8548 Ethernet internal/External Loop back testing
02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages
02/12 Becky Bruce        [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Becky Bruce        Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/12 Jon Loeliger       Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
02/16 Kim Phillips       Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
02/17 Heiko Schocher     [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
02/17 Heiko Schocher     [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/17 Heiko Schocher     [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.
02/17 Kumar Gala         [U-Boot] [PATCH] fsl: Don't spew messages related to PHY fixup of device tree
02/19 Anton Vorontsov    [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx
02/19 Anton Vorontsov    [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
02/19 Anton Vorontsov    [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper
02/19 Anton Vorontsov    [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0
02/19 Anton Vorontsov    [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
02/19 Anton Vorontsov    [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
02/19 Anton Vorontsov    [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value
02/19 Anton Vorontsov    [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support
02/19 Heiko Schocher     [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support
02/19 Heiko Schocher     [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM
02/19 Heiko Schocher     [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c
02/19 Heiko Schocher     [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines
02/19 Heiko Schocher     [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03
02/19 Heiko Schocher     [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
02/19 Heiko Schocher     [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.


Thanks in advance.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anything free is worth what you pay for it.

[U-Boot] Status open patches: 8xxx

[Heiko Schocher]

Hello Wolfgang, Kim,

Wolfgang Denk schrieb:
> Dear Kim, Andy & Jon,
>
> I have the following patches still marked as open in my list. Could
> you please have a look... 
>
> 8xxx:
>   
[...]
> 02/17 Heiko Schocher     [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
> 02/17 Heiko Schocher     [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
> 02/17 Heiko Schocher     [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.
>   

This three patches are replaced by v3 version of this patchset -> no
longer needed.

bye
Heiko

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany 

[U-Boot] Status open patches: 8xxx

[Pieter]

Dear Wolfgang

Wolfgang Denk wrote:
> Dear Kim, Andy & Jon,
>
> I have the following patches still marked as open in my list. Could
> you please have a look... 
>
> 8xxx:
> 11/06 Anton Vorontsov    [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB
> 12/11 Paul Gortmaker     [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
> 12/30 Poonam_Aggrwal-b1  [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)
> 01/15 hamoshame Lamotek  [U-Boot] MPC8572DS Registered DDR2 support.
> 01/22 Pieter             [U-Boot] Custom MPC8548 boot using FDT problem
<Snip>

The problem addressed in " 01/22 Pieter   [U-Boot] Custom MPC8548 boot
using FDT problem "  has been resolved and was a combination on defines
in the board.h file and definition in the device tree source. is there
something I need to do to resolve the "open patch status"

regards Pieter

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2722 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090223/902067a7/attachment.bin 

[U-Boot] Status open patches: 8xxx

[Jon Loeliger]

On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
> Dear Kim, Andy & Jon,
> 
> I have the following patches still marked as open in my list. Could
> you please have a look... 
> 
> 8xxx:

> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs
> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address
> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound
> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts

> 02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages
> 02/12 Becky Bruce        [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
> 02/12 Becky Bruce        Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
> 02/12 Jon Loeliger       Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default

> Best regards,
> 
> Wolfgang Denk

Wolfgang,

It was my belief that all outstanding 86xx patches had
either been Acked-by me and should be picked up by either
Andy or Wolfgang, or had been subsumed into other already
applied patches.

Becky (or Kumar?),

Could you verify that the 36-bit and address-map related patches
are correct in WD's current master head and that you are happy
with them?  I thought we got them all there, but I could be wrong.
Or maybe we need to wait for a set to be picked up with the 85xx
tree from Andy still?

Thanks,
jdl

[U-Boot] Status open patches: 8xxx

[Becky Bruce]

On Feb 23, 2009, at 12:14 PM, Jon Loeliger wrote:

> On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
>> Dear Kim, Andy & Jon,
>>
>> I have the following patches still marked as open in my list. Could
>> you please have a look...
>>
>> 8xxx:
>
>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 4/8] mpc86xx: Add  
>> support to populate addr map based on BATs
>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 8/8] mpc8641hpcn:  
>> Change PCI MEM pci bus address
>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set  
>> up outbound pci windows before inbound
>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 5/8] mpc8641hpcn:  
>> Clean up PCI mapping concepts
>
>> 02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36- 
>> bit addr map in boot messages
>> 02/12 Becky Bruce        [U-Boot] [PATCH] MPC86xx: set  
>> CONFIG_MAX_MEM_MAPPED to 2G by default
>> 02/12 Becky Bruce        Re: [U-Boot] [PATCH] MPC86xx: set  
>> CONFIG_MAX_MEM_MAPPED to 2G by default
>> 02/12 Jon Loeliger       Re: [U-Boot] [PATCH] MPC86xx: set  
>> CONFIG_MAX_MEM_MAPPED to 2G by default
>
>> Best regards,
>>
>> Wolfgang Denk
>
> Wolfgang,
>
> It was my belief that all outstanding 86xx patches had
> either been Acked-by me and should be picked up by either
> Andy or Wolfgang, or had been subsumed into other already
> applied patches.
>
> Becky (or Kumar?),
>
> Could you verify that the 36-bit and address-map related patches
> are correct in WD's current master head and that you are happy
> with them?  I thought we got them all there, but I could be wrong.
> Or maybe we need to wait for a set to be picked up with the 85xx
> tree from Andy still?

So, there are only 2 patches of mine outstanding (the third message  
above is just a note about a dependency).

This one should still apply and needs to be picked up, WD can pick it  
up directly because it's very small:

>> 02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36- 
>> bit addr map in boot messages

The second one looks like it won't apply anymore due to a change from  
Stefan; I will submit a new one that WD can pick up directly as long  
as it's OK with you.

Cheers,
Becky

[U-Boot] Status open patches: 8xxx

[Becky Bruce]

OK, I have resubmitted the MAX_MEM_MAPPED patch to apply to the  
current master u-boot tree.

-Becky

On Feb 23, 2009, at 12:53 PM, Becky Bruce wrote:

>
> On Feb 23, 2009, at 12:14 PM, Jon Loeliger wrote:
>
>> On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
>>> Dear Kim, Andy & Jon,
>>>
>>> I have the following patches still marked as open in my list. Could
>>> you please have a look...
>>>
>>> 8xxx:
>>
>>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 4/8] mpc86xx: Add
>>> support to populate addr map based on BATs
>>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 8/8] mpc8641hpcn:
>>> Change PCI MEM pci bus address
>>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set
>>> up outbound pci windows before inbound
>>> 02/04 Jon Loeliger       Re: [U-Boot] [PATCH 5/8] mpc8641hpcn:
>>> Clean up PCI mapping concepts
>>
>>> 02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-
>>> bit addr map in boot messages
>>> 02/12 Becky Bruce        [U-Boot] [PATCH] MPC86xx: set
>>> CONFIG_MAX_MEM_MAPPED to 2G by default
>>> 02/12 Becky Bruce        Re: [U-Boot] [PATCH] MPC86xx: set
>>> CONFIG_MAX_MEM_MAPPED to 2G by default
>>> 02/12 Jon Loeliger       Re: [U-Boot] [PATCH] MPC86xx: set
>>> CONFIG_MAX_MEM_MAPPED to 2G by default
>>
>>> Best regards,
>>>
>>> Wolfgang Denk
>>
>> Wolfgang,
>>
>> It was my belief that all outstanding 86xx patches had
>> either been Acked-by me and should be picked up by either
>> Andy or Wolfgang, or had been subsumed into other already
>> applied patches.
>>
>> Becky (or Kumar?),
>>
>> Could you verify that the 36-bit and address-map related patches
>> are correct in WD's current master head and that you are happy
>> with them?  I thought we got them all there, but I could be wrong.
>> Or maybe we need to wait for a set to be picked up with the 85xx
>> tree from Andy still?
>
> So, there are only 2 patches of mine outstanding (the third message
> above is just a note about a dependency).
>
> This one should still apply and needs to be picked up, WD can pick it
> up directly because it's very small:
>
>>> 02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-
>>> bit addr map in boot messages
>
> The second one looks like it won't apply anymore due to a change from
> Stefan; I will submit a new one that WD can pick up directly as long
> as it's OK with you.
>
> Cheers,
> Becky
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Status open patches: 8xxx

[Jon Loeliger]

Becky Bruce wrote:

> This one should still apply and needs to be picked up, WD can pick it up 
> directly because it's very small:
> 
>>> 02/12 Becky Bruce        [U-Boot] [PATCH] mpc8641hpcn: Indicate 
>>> 36-bit addr map in boot messages

OK, sounds fine by me.  Thanks.


> The second one looks like it won't apply anymore due to a change from 
> Stefan; I will submit a new one that WD can pick up directly as long as 
> it's OK with you.

Yep, consider it pre-Ack'ed. :-)

Thanks,
jdl

[U-Boot] Status open patches: 8xxx

[Kim Phillips]

On Sun, 22 Feb 2009 01:00:14 +0100
Wolfgang Denk <wd@denx.de> wrote:

> I have the following patches still marked as open in my list. Could
> you please have a look... 
> 
> 8xxx:
> 11/06 Anton Vorontsov    [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB

this is apparently pending resubmission from its author, Anton:

http://lists.denx.de/pipermail/u-boot/2008-November/043348.html:

"Please don't queue this patch yet. I'll send an updated version
soon, that will also define CFG_BOOTM_LEN (so that bootm command
will able to gunzip 16MB images)."

(Anton cc'd)

> 01/22 Scott Wood         Re: [U-Boot] mpc8313erdb: crash in image_print_type()

this isn't a patch; it's a thread that concludes that manual relocation
is needed.

> 02/05 Valeriy Glushkov   [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334

this is commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5 in the
u-boot-mpc83xx tree.

> 02/16 Kim Phillips       Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334

I believe this is me saying I applied it to u-boot-mpc83xx, just as I
did above :).

> 02/17 Heiko Schocher     [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support
> 02/17 Heiko Schocher     [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
> 02/17 Heiko Schocher     [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.

As he already mentioned, Heiko has already resubmitted a 3rd version of
these...

> 02/19 Anton Vorontsov    [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value
> 02/19 Anton Vorontsov    [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support
> 02/19 Heiko Schocher     [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support
> 02/19 Heiko Schocher     [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM
> 02/19 Heiko Schocher     [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c
> 02/19 Heiko Schocher     [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines
> 02/19 Heiko Schocher     [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03
> 02/19 Heiko Schocher     [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
> 02/19 Heiko Schocher     [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.

...here.  And Anton's are the latest submitted to the list and I
intend on picking them up and sending you a pull request soon.

Kim

[U-Boot] Status open patches: 8xxx

[Wolfgang Denk]

Dear Kim,

In message <20090223154208.d3712e54.kim.phillips@freescale.com> you wrote:
...
> ...here.  And Anton's are the latest submitted to the list and I
> intend on picking them up and sending you a pull request soon.

Thanks for the detailed report.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Lispers are among  the  best  grads  of  the  Sweep-It-Under-Someone-
Else's-Carpet  School of Simulated Simplicity. [Was that sufficiently
incendiary? :-)]  - Larry Wall in <1992Jan10.201804.11926@netlabs.com

[U-Boot] Status open patches: 8xxx

[Andy Fleming]

8xxx:
12/11 Paul Gortmaker ? ? [U-Boot] [PATCH] tsec: report when there is
no vendor specific PHY support.

Applied

12/30 Poonam_Aggrwal-b1 ?[U-Boot] [PATCH][u-boot-85xx]The 32bit errata
fix for 8572 for DDR2 (fwd)

This was applied (e1be0d25ecf494ae81245ca438738ba839d6329b)

01/15 hamoshame Lamotek ?[U-Boot] MPC8572DS Registered DDR2 support.

This is just a question thread

02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support
to populate addr map based on BATs
02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change
PCI MEM pci bus address
02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up
outbound pci windows before inbound
02/04 Jon Loeliger ? ? ? Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean
up PCI mapping concepts

All were applied at some point

02/10 "Ajeesh Kumar" ? ? U-boot level MPC8548 Ethernet
internal/External Loop back testing

Not a patch

02/12 Becky Bruce ? ? ? ?[U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit
addr map in boot messages
02/12 Becky Bruce ? ? ? ?[U-Boot] [PATCH] MPC86xx: set
CONFIG_MAX_MEM_MAPPED to 2G by default

Both applied already.