From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Sun, 22 Feb 2009 09:43:32 +0100 Subject: [U-Boot] Status open patches: ARM, AT91, IXP, PXA In-Reply-To: <20090222062613.GB2822@game.jcrosoft.org> References: <20090222000003.B598D832E43F@gemini.denx.de> <20090222062613.GB2822@game.jcrosoft.org> Message-ID: <49A11034.6080001@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang and Jean-Christophe, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 01:00 Sun 22 Feb , Wolfgang Denk wrote: >> Dear Jean-Christophe, >> >> I have the following patches still marked as open in my list. Could >> you please have a look... >> >> ARM, AT91: >> >> 04/24 michael [U-Boot-Users] [PATCH ARM 0/2] Ide support >> 04/24 michael [U-Boot-Users] [PATCH ARM 1/2] Ide support io function >> 04/24 michael [U-Boot-Users] [PATCH ARM 2/2] Ide support. Ide registration >> 08/15 Sergey Lapin [U-Boot] [PATCH][Re-submit] Hardware watchdog support for AT91SAM9260 CPU > at91 watchdog support already mainline >> 08/28 Markus Kammerstet [U-Boot] PATCH: U-Boot support for Olimex SAM9L-9260 development board >> 10/07 "Alan Carvalho de [U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM >> 10/07 "Alan Carvalho de [U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash >> 10/13 "Roman Mashak" [U-Boot] [PATCH] ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory > applied >> 10/21 Tomohiro Masubuch [U-Boot] [PATCH v4] Add support for KMC KZM-ARM11-01 board >> 10/23 Magnus Lilja [U-Boot] [PATCH 1/2] i.MX31: Use do_div for some calculations. >> 10/23 Magnus Lilja [U-Boot] [PATCH 2/2] i.MX31: Add basic support for Freescale's i.MX31 PDK board. >> 11/07 Ilko Iliev [U-Boot] [PATCH] at91: add support for PM9261 board > need fix >> 11/13 Chaofu Chen [U-Boot] [PATCH] bug fix for the delay function of ARM s3c44b0 >> 11/21 Hugo Villeneuve [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals and modules enable functions. >> 11/26 Jens Scharsig [U-Boot] [PATCH] AT91RM9200 BGA port D defines >> 12/04 Stefan Althoefer [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1 >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH 0/3] Bad blocks and Partition support for OneNAND / Flex-OneNAND >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH 1/3] Bad block support for environment variables partition in OneNAND >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH 2/3] Add partition based OneNAND commands >> 12/11 Rohit Hagargundgi [U-Boot] [PATCH 3/3] Create bad block aware partition table >> 12/13 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support >> 12/14 Dirk Behme [U-Boot] [PATCH 01/15 v6] OMAP3: Add pin mux, clock and cpu headers > omap3 first series already mainline Yes. Agreeed. All xx/15 OMAP3 patches are applied. You can remove them from this list. >> 12/14 Dirk Behme [U-Boot] [PATCH 05/15 v6] : Add common board, interrupt and system info Already applied as stated above. Can be removed from this list. >> 12/17 Peter Tyser [U-Boot] [PATCH v6 0/3] Support for XPedite5370 and misc GPIO >> 01/07 Ulf Samuelsson [U-Boot] [PATCH 1/1] ARM: Add command to control coloured led from the console >> 01/20 Ben Warren Re: [U-Boot] [PATCH] Add support W90P710 ARM SoC from Nuvoton >> 01/22 Jean-Christophe P [U-Boot] [PATCH] at91rm9200: move serial driver to drivers/serial >> 01/22 Jean-Christophe P [U-Boot] [PATCH 0/2] at91sam9: add watchdog support >> 01/22 Jean-Christophe P [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config >> 01/22 Jean-Christophe P [U-Boot] [PATCH 1/2] at91sam9: add watchdog support >> 01/24 Michael Roth [U-Boot] Patches for new at91 board / lowlevel_init.S > NACK >> 01/25 Michael Roth Re: [U-Boot] Patches for new at91 board / lowlevel_init.S > NACK >> 01/25 Jason Kridner [U-Boot] [PATCH v2 0/5] OMAP3: Add OMAP3 board support >> 01/25 Jason Kridner [U-Boot] [PATCH v2 1/5] OMAP3: Add common power code, README, and BeagleBoard >> 01/25 Jason Kridner [U-Boot] [PATCH v2 2/5] OMAP3: Add Overo board >> 01/25 Jason Kridner [U-Boot] [PATCH v2 3/5] OMAP3: Add EVM board >> 01/25 Jason Kridner [U-Boot] [PATCH v2 4/5] OMAP3: Add Pandora support >> 01/25 Jason Kridner [U-Boot] [PATCH v2 5/5] OMAP3: Add Zoom1 board support These 6 OMAP3 patches are already applied, too. Can be removed from this list. >> 01/26 Magnus Lilja Re: [U-Boot] [PATCH v3 0/6] i.MX31: Add NAND support and new PDK board. >> 01/27 Dirk Behme [U-Boot] [PATCH v3 1/5] OMAP3: Add common power code, README, and BeagleBoard Already applied, too. Can be removed from this list. >> 02/01 Jean-Christophe P [U-Boot] [PATCH] at91sam9xeek: fix soc name >> 02/01 Jean-Christophe P [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config >> 02/01 Jean-Christophe P [U-Boot] [PATCH 1/2] at91sam9: add watchdog support >> 02/02 Dirk Behme [U-Boot] [PATCH 3/7] OMAP3: Add OMAP3 auto detection >> 02/02 Dirk Behme [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB >> 02/02 Dirk Behme [U-Boot] [PATCH 7/7] OMAP3: Clean up MMC code These 3 OMAP3 patches are replaced by v2 below. Can be removed from this list. >> 02/03 Jean-Christophe P [U-Boot] [PATCH] integratorap: fix PCI support >> 02/05 Grazvydas Ignotas Re: [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux Replaced by v2 below. Can be removed from this list. >> 02/06 Michael Roth [U-Boot] [PATCH] at91: CONFIG_USART3 renamed to CONFIG_USART_DBGU >> 02/06 Michael Roth [U-Boot] [PATCH] at91: Factored out common serial hardware initialization >> 02/06 Jean-Christophe P Re: [U-Boot] [PATCH] at91: Factored out common serial hardware initialization >> 02/06 Mark Jackson Re: [U-Boot] [PATCH 1/1] Setup extra MIMC200 chip selects >> 02/06 Jean-Christophe P Re: [U-Boot] [PATCH] Add support W90P710 ARM SoC from Nuvoton >> 02/07 Anatolij Gustschi [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit > go throught video tree with the video patsh set >> 02/07 Jean-Christophe P Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit >> 02/07 Anatolij Gustschi Re: [U-Boot] [PATCH 1/9 v4] i.MX31: fix SPI driver for shorter than 32 bit >> 02/07 Anatolij Gustschi [U-Boot] [PATCH 2/9 v4] i.MX31: add a simple gpio driver >> 02/09 Alessandro Rubini [U-Boot] [PATCH 1/3] Added nomadik.h header >> 02/10 Fabio Porcedda [U-Boot] Atmel AT91 USB Device Controller Driver >> 02/10 Remy Bohmer Re: [U-Boot] Atmel AT91 USB Device Controller Driver >> 02/11 Remy Bohmer Re: [U-Boot] Atmel AT91 USB Device Controller Driver >> 02/12 Dirk Behme [U-Boot] [PATCH 0/7 v2] OMAP3: Add some additional improvements and fixes Yes. Still pending. See my summary of what is still pending below, too. Will hopefully be easier ;) >> 02/12 Dirk Behme Re: [U-Boot] [PATCH 6/7] OMAP3: Add OMAP3 core changes for MUSB Hmm, I don't think this is a patch, just a mail discussing the patch. Please remove from this list. >> 02/12 Dirk Behme [U-Boot] [PATCH 4/7 v2] OMAP3: Pandora: Update pin mux >> 02/12 Dirk Behme [U-Boot] [PATCH 3/7 v2] OMAP3: Add OMAP3 auto detection Yes, both still pending >> 02/12 Dirk Behme [U-Boot] [PATCH 7/7 v2] OMAP3: Clean up MMC code Is replaced by v3 below. Can be removed. >> 02/12 Dirk Behme [U-Boot] [PATCH 1/7 v2] OMAP3: Overo: Clean up pin mux and GPIO configuration >> 02/12 Dirk Behme [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB >> 02/12 Dirk Behme [U-Boot] [PATCH 2/7 v2] OMAP3: Beagle: Add board revision detection Yes, all three still pending. >> 02/12 Dirk Behme Re: [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID No patch, only discussion. Can be removed from this list. >> 02/12 Dirk Behme [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID Yes, still pending. >> 02/13 Grzegorz Bernacki [U-Boot] [PATCH v6] Add support for the digsy MTC board. >> 02/13 Mark Jackson [U-Boot] [PATCH 1/1 v2] Setup extra MIMC200 chip selects >> 02/16 Fabio Porcedda Re: [U-Boot] Atmel AT91 USB Device Controller Driver >> 02/17 Hugo Villeneuve Re: [U-Boot] [PATCH 1/1] ARM DaVinci: Add common peripherals andmodules enable functions. >> 02/19 ksi at koi8.net [U-Boot] [PATCH] Davinci I2C code cleanup >> 02/19 Tom Re: [U-Boot] [PATCH] ARM:OMAP3 Change mmc_init to mmc_legacy_init Already applied. Please remove from this list. >> 02/20 yanfeng qin [U-Boot] [PATH] ARM:OMAP3 Add OTG host support >> 02/20 yanfeng qin [U-Boot] [PATCH] ARM:OMAP3 Add OTG host support > can't apply and need fix Yes. Both can be removed from this list. They are not against anything what is available in any mainline git and remove a lot functionality as already mentioned. >> 02/20 Dirk Behme [U-Boot] [PATCH 7/7 v3] OMAP3: Clean up MMC code Yes, still pending. Replaces v2 above. Conclusion for OMAP3: Still open: 02/12 Dirk Behme [U-Boot] [PATCH 0/7 v2] OMAP3: Add some additional improvements and fixes 02/12 Dirk Behme [U-Boot] [PATCH 1/7 v2] OMAP3: Overo: Clean up pin mux and GPIO configuration 02/12 Dirk Behme [U-Boot] [PATCH 2/7 v2] OMAP3: Beagle: Add board revision detection 02/12 Dirk Behme [U-Boot] [PATCH 3/7 v2] OMAP3: Add OMAP3 auto detection 02/12 Dirk Behme [U-Boot] [PATCH 4/7 v2] OMAP3: Pandora: Update pin mux 02/12 Dirk Behme [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID 02/12 Dirk Behme [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB 02/20 Dirk Behme [U-Boot] [PATCH 7/7 v3] OMAP3: Clean up MMC code All other entries with "OMAP3" in subject in this list can be removed. Additionally (not at this list), we *really* like to get an ARM mach-types update http://lists.denx.de/pipermail/u-boot/2009-February/046756.html http://lists.denx.de/pipermail/u-boot/2009-February/046755.html Many thanks for tracking and this reminder, Dirk Btw.: Wolfgang: How do you maintain this list? Manually? Or any script? I always like to learn new things ;)