From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Tue, 24 Feb 2009 07:58:27 +0100 Subject: [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support In-Reply-To: <20090223163545.2a21d4df.kim.phillips@freescale.com> References: <499D87A5.4030407@denx.de> <20090223163545.2a21d4df.kim.phillips@freescale.com> Message-ID: <49A39A93.8090209@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Kim, Kim Phillips wrote: > On Thu, 19 Feb 2009 17:24:05 +0100 > Heiko Schocher wrote: > >> This patch adds I2C support for the Keymile kmeter1 board. >> It uses the First I2C Controller from the CPU, for >> accessing 4 temperature sensors, an eeprom with IVM data >> and the booteeprom over a pca9547 mux. >> >> Signed-off-by: Heiko Schocher >> --- >> I let the dtt_bus env variable in this patch, and remove this, >> when I send a patch for moving dtt_init after relocation is >> done. Then this is no longer needed. > > These things usually work the other way around; please fix this so > dtt_bus isn't needed. Ok thanks Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany