[U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.

[Nicolas Ferre <nicolas.ferre@atmel.com>]

Wolfgang Denk :
> Dear Nicolas Ferre,
> 
> In message <49B51F04.8000804@atmel.com> you wrote:
>> AT91sam9g20 is an evolution of the at91sam9260 
>> with a faster clock speed.
>>
>> Here is the chip page on Atmel website:
>> http://www.atmel.com/dyn/products/product_card.asp?part_id=4337
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>>  Makefile                                  |   17 ++
>>  board/atmel/at91sam9g20ek/Makefile        |   57 +++++++
>>  board/atmel/at91sam9g20ek/at91sam9g20ek.c |  261 +++++++++++++++++++++++++++++
>>  board/atmel/at91sam9g20ek/config.mk       |    1 +
>>  board/atmel/at91sam9g20ek/led.c           |   64 +++++++
>>  board/atmel/at91sam9g20ek/nand.c          |   78 +++++++++
>>  board/atmel/at91sam9g20ek/partition.c     |   40 +++++
>>  cpu/arm926ejs/at91/usb.c                  |    4 +-
>>  doc/README.at91                           |    2 +-
>>  drivers/net/macb.c                        |    4 +-
>>  include/asm-arm/arch-at91/hardware.h      |    2 +-
>>  include/configs/at91sam9g20ek.h           |  201 ++++++++++++++++++++++
>>  12 files changed, 725 insertions(+), 6 deletions(-)
> 
> Hm.... to me it  seems  that  the  new  files  added  are,  with  the
> exception  of  "at91sam9260ek"  into "at91sam9260ek" renames, more or
> less identical copies of the board/atmel/at91sam9260ek code ?
> 
> 
> Please use common code and avoid such code duplication.

Wolfgang,

Ok, so a new patch follows with much clever adding of at91sam9g20 (Comes 
from Justin Waters).

Thanks for your comments, regards,
-- 
Nicolas Ferre