[U-Boot] About PCI of U-BOOT of CANYONLANDS

[Felix Radensky <felix@embedded-sol.com>]

Stefan Roese wrote:
> On Wednesday 18 March 2009, Felix Radensky wrote:
>   
>>>> PCI:   Bus Dev VenId DevId Class Int
>>>>          00  06  1002  5960  0300  ff
>>>>          00  06  1002  5940  0380  ff
>>>> PCIE1: link is not up.
>>>> PCIE1: initialization as root-complex failed
>>>> Video: ATI Radeon video card (1002, 5960) found @(0:6:0)
>>>> Machine Check Exception.
>>>> Caused by (from msr): regs 1fe3ac30 Data Read PLB Error
>>>> NIP: 1FF82B10 XER: 00000000 LR: 1FF82AE8 REGS: 1fe3ac30 TRAP: 0200 DEAR:
>>>> 70600027
>>>> MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
>>>>         
>>> Anatolij, do you have any ideas what's going wrong here?
>>>
>>> Thanks.
>>>       
>> Looks like you have ATI cards in both PCI-E slots and also SATA
>> enabled. This cannot work, as SATA shares lines with x1 PCI-E
>> slot on Canyonlands.  Use J6 jumper to enable both PCI-E slots.
>>     
>
> No, it's PCI and not PCIe.
>
> Best regards,
> Stefan
>
>   

I see. Sorry for the noise. I was confused by the presence of two devices,
and the fact that there's only one PCI slot on this board. It should be a
multifunction PCI device then.

Felix.