From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anatolij Gustschin <agust@denx.de>
Date: Wed, 18 Mar 2009 13:03:40 +0100
Subject: [U-Boot] About PCI of U-BOOT of CANYONLANDS
In-Reply-To: <200903181007.13324.sr@denx.de>
References: <49BFA0BE.7060103@fsi.co.jp> <200903171413.03396.sr@denx.de>
	<49C04E2C.5070507@fsi.co.jp> <200903181007.13324.sr@denx.de>
Message-ID: <49C0E31C.9050200@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Stefan, Kazuaki,

Stefan Roese wrote:
> On Wednesday 18 March 2009, Kazuaki Ichinohe wrote:
>> U-boot version: u-boot-2009.01
>> boot log is the following.
>>
>> U-Boot 2009.01 ( 3? 18 2009 - 09:38:17)
>>
>> ?PU:   AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100 MHz)
>>         Security/Kasumi support
>>         Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
>>         Internal PCI arbiter disabled
>>         32 kB I-Cache 32 kB D-Cache
>> Board: Canyonlands - AMCC PPC460EX Evaluation Board, 1*PCIe/1*SATA, Rev. 14
>> I2C:   ready
>> DTT:   1 is 38 C
>> DRAM:  512 MB (ECC not enabled, 400 MHz, CL3)
>> FLASH: 64 MB
>> NAND:  128 MiB
>> PCI:   Bus Dev VenId DevId Class Int
>>          00  06  1002  5960  0300  ff
>>          00  06  1002  5940  0380  ff
>> PCIE1: link is not up.
>> PCIE1: initialization as root-complex failed
>> Video: ATI Radeon video card (1002, 5960) found @(0:6:0)
>> Machine Check Exception.
>> Caused by (from msr): regs 1fe3ac30 Data Read PLB Error
>> NIP: 1FF82B10 XER: 00000000 LR: 1FF82AE8 REGS: 1fe3ac30 TRAP: 0200 DEAR:
>> 70600027
>> MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
> 
> Anatolij, do you have any ideas what's going wrong here?

one issue is incorrect VIDEO_IO_OFFSET in the board config file, it
should be 0xD0800000 instead of 0xD8000000, i think.

Kazuaki, could you please change VIDEO_IO_OFFSET to 0xD0800000 and
test again?

Best regards,
Anatolij

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de