From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
Date: Fri, 27 Mar 2009 11:33:55 +0100 [thread overview]
Message-ID: <49CCAB93.6030901@denx.de> (raw)
In-Reply-To: <1237998478-18452-5-git-send-email-dzu@denx.de>
Hi Detlev,
some more small style issues, see comments below.
Detlev Zundel wrote:
> diff --git a/drivers/rtc/rtc4543.c b/drivers/rtc/rtc4543.c
> new file mode 100644
> index 0000000..242d9bc
> --- /dev/null
> +++ b/drivers/rtc/rtc4543.c
> @@ -0,0 +1,118 @@
...
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
----------------------------------------------------------^
please, remove space here.
<snip>
> +/*
> + * Note: The acrobatics below is due to the hideously ingenius idea of
> + * the chip designers. As the chip does not allow register
-------------------------^
please, remove space here.
> + * addressing, all values need to be read and written in one go. Sure
-------------------------------------------------------------------^
please, remove space here.
<snip>
> +int rtc_get(struct rtc_time *tm)
> +{
> + int rel = 0;
> + uchar buffer[7];
> +
> + memset(buffer, 0, 7);
> +
> + /* Read 52 bits into our buffer */
> + tws_read(buffer, 52);
> +
> + tm->tm_sec = BCD2BIN( buffer[0] & 0x7F);
> + tm->tm_min = BCD2BIN( buffer[1] & 0x7F);
> + tm->tm_hour = BCD2BIN( buffer[2] & 0x3F);
> + tm->tm_wday = BCD2BIN( buffer[3] & 0x07);
------------------------------^
please, remove space here.
> + tm->tm_mday = BCD2BIN((buffer[3] & 0xF0) >> 4 | (buffer[4] & 0x0F) << 4);
> + tm->tm_mon = BCD2BIN((buffer[4] & 0x30) >> 4 | (buffer[5] & 0x0F) << 4);
> + tm->tm_year = BCD2BIN((buffer[5] & 0xF0) >> 4 | (buffer[6] & 0x0F) << 4) + 2000;
these tree lines above are too long.
...
> diff --git a/include/rtc.h b/include/rtc.h
> index 785fbe3..019c2eb 100644
> --- a/include/rtc.h
> +++ b/include/rtc.h
> @@ -61,4 +61,8 @@ void to_tm (int, struct rtc_time *);
> unsigned long mktime (unsigned int, unsigned int, unsigned int,
> unsigned int, unsigned int, unsigned int);
>
> +uchar rtc_read(uchar reg) __attribute__((weak));
> +void rtc_write(uchar reg, uchar val) __attribute__((weak));
> +
> +
remove one blank line here, please.
Best regards,
Anatolij
next prev parent reply other threads:[~2009-03-27 10:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-25 16:27 [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 2/7] mpc5xxx: Add structure definition for several more register blocks Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON) Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 5/7] inka4x0: Add hardware diagnosis functions for inka4x0 Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 6/7] inka4x0: Add hardware diagnosis and RTC in configuration Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 7/7] inka4x0: Use proper accessor macros for memory mapped registers Detlev Zundel
2009-03-27 10:33 ` Anatolij Gustschin [this message]
2009-03-27 10:51 ` [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON) Wolfgang Denk
2009-03-27 11:13 ` Detlev Zundel
2009-03-27 12:43 ` Anatolij Gustschin
2009-03-27 12:53 ` Jerry Van Baren
2009-03-27 13:00 ` Detlev Zundel
2009-03-27 16:06 ` Scott Wood
2009-03-25 19:19 ` [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface Wolfgang Denk
2009-03-26 9:33 ` Detlev Zundel
2009-03-26 15:23 ` Detlev Zundel
2009-03-27 20:08 ` Wolfgang Denk
2009-03-27 10:02 ` Anatolij Gustschin
2009-03-27 10:33 ` Detlev Zundel
2009-03-27 20:06 ` [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot Wolfgang Denk
2009-03-25 16:36 ` [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49CCAB93.6030901@denx.de \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox