public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Dirk Behme <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 13/19] omap3: remove duplicate interrupts code
Date: Mon, 30 Mar 2009 15:39:31 +0200	[thread overview]
Message-ID: <49D0CB93.1060005@googlemail.com> (raw)
In-Reply-To: <1238360583-19791-13-git-send-email-plagnioj@jcrosoft.com>

Dear Jean-Christophe,

Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  cpu/arm_cortexa8/omap3/interrupts.c |  128 -----------------------------------
>  1 files changed, 0 insertions(+), 128 deletions(-)

It seems to me that this patch is a re-post of

http://lists.denx.de/pipermail/u-boot/2009-March/049736.html

?

If this is the case, it would be helpful if you could mark re-send 
patches with 'v2' or something similar, explain what changed (or 
what's unchanged) and that the previous patch is obsolete with the 
re-post.

Dirk

Btw.: A description in the body of a patch (and not subject only) 
going into git would be nice, too. E.g.

"Remove interrupt code which is already in xxx and therefore not 
needed here"

> diff --git a/cpu/arm_cortexa8/omap3/interrupts.c b/cpu/arm_cortexa8/omap3/interrupts.c
> index 9e9817d..384ffdc 100644
> --- a/cpu/arm_cortexa8/omap3/interrupts.c
> +++ b/cpu/arm_cortexa8/omap3/interrupts.c
> @@ -34,137 +34,9 @@
>  
>  #include <common.h>
>  #include <asm/io.h>
> -#include <asm/proc-armv/ptrace.h>
>  
>  #define TIMER_LOAD_VAL 0
>  
> -#ifdef CONFIG_USE_IRQ
> -/* enable IRQ interrupts */
> -void enable_interrupts(void)
> -{
> -	unsigned long temp;
> -	__asm__ __volatile__("mrs %0, cpsr\n"
> -			     "bic %0, %0, #0x80\n" "msr cpsr_c, %0":"=r"(temp)
> -			     ::"memory");
> -}
> -
> -/*
> - * disable IRQ/FIQ interrupts
> - * returns true if interrupts had been enabled before we disabled them
> - */
> -int disable_interrupts(void)
> -{
> -	unsigned long old, temp;
> -	__asm__ __volatile__("mrs %0, cpsr\n"
> -			     "orr %1, %0, #0xc0\n"
> -			     "msr cpsr_c, %1":"=r"(old), "=r"(temp)
> -			     ::"memory");
> -	return (old & 0x80) == 0;
> -}
> -#else
> -void enable_interrupts(void)
> -{
> -	return;
> -}
> -int disable_interrupts(void)
> -{
> -	return 0;
> -}
> -#endif
> -
> -void bad_mode(void)
> -{
> -	panic("Resetting CPU ...\n");
> -	reset_cpu(0);
> -}
> -
> -void show_regs(struct pt_regs *regs)
> -{
> -	unsigned long flags;
> -	const char *processor_modes[] = {
> -		"USER_26", "FIQ_26", "IRQ_26", "SVC_26",
> -		"UK4_26", "UK5_26", "UK6_26", "UK7_26",
> -		"UK8_26", "UK9_26", "UK10_26", "UK11_26",
> -		"UK12_26", "UK13_26", "UK14_26", "UK15_26",
> -		"USER_32", "FIQ_32", "IRQ_32", "SVC_32",
> -		"UK4_32", "UK5_32", "UK6_32", "ABT_32",
> -		"UK8_32", "UK9_32", "UK10_32", "UND_32",
> -		"UK12_32", "UK13_32", "UK14_32", "SYS_32",
> -	};
> -
> -	flags = condition_codes(regs);
> -
> -	printf("pc : [<%08lx>]    lr : [<%08lx>]\n"
> -		"sp : %08lx  ip : %08lx  fp : %08lx\n",
> -		instruction_pointer(regs),
> -		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
> -	printf("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
> -		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
> -	printf("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
> -		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
> -	printf("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
> -		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
> -	printf("Flags: %c%c%c%c",
> -		flags & CC_N_BIT ? 'N' : 'n',
> -		flags & CC_Z_BIT ? 'Z' : 'z',
> -		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
> -	printf("  IRQs %s  FIQs %s  Mode %s%s\n",
> -		interrupts_enabled(regs) ? "on" : "off",
> -		fast_interrupts_enabled(regs) ? "on" : "off",
> -		processor_modes[processor_mode(regs)],
> -		thumb_mode(regs) ? " (T)" : "");
> -}
> -
> -void do_undefined_instruction(struct pt_regs *pt_regs)
> -{
> -	printf("undefined instruction\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -void do_software_interrupt(struct pt_regs *pt_regs)
> -{
> -	printf("software interrupt\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -void do_prefetch_abort(struct pt_regs *pt_regs)
> -{
> -	printf("prefetch abort\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -void do_data_abort(struct pt_regs *pt_regs)
> -{
> -	printf("data abort\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -void do_not_used(struct pt_regs *pt_regs)
> -{
> -	printf("not used\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -void do_fiq(struct pt_regs *pt_regs)
> -{
> -	printf("fast interrupt request\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -void do_irq(struct pt_regs *pt_regs)
> -{
> -	printf("interrupt request\n");
> -	show_regs(pt_regs);
> -	bad_mode();
> -}
> -
> -
>  static ulong timestamp;
>  static ulong lastinc;
>  static gptimer_t *timer_base = (gptimer_t *)CONFIG_SYS_TIMERBASE;

      parent reply	other threads:[~2009-03-30 13:39 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-29 21:02 [U-Boot] [PATCH 01/19] s3c4510b: move specific code to soc directory Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02 ` [U-Boot] [PATCH 02/19] s3c44b0: move i2c driver to drivers/i2c Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02   ` [U-Boot] [PATCH 03/19] s3c44b0: move rtc driver to drivers/rtc Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02     ` [U-Boot] [PATCH 04/19] s3c44b0: move serial driver to drivers/serial Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02       ` [U-Boot] [PATCH 05/19] s3c44b0: extract cache from cpu.c Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02         ` [U-Boot] [PATCH 06/19] sa1100: move serial driver to drivers/serial Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02           ` [U-Boot] [PATCH 07/19] netarm: " Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02             ` [U-Boot] [PATCH 08/19] imx31: " Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02               ` [U-Boot] [PATCH 09/19] s3c64xx: move usb driver to drivers/usb Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02                 ` [U-Boot] [PATCH 10/19] ks8695: move serial driver to drivers/serial Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02                   ` [U-Boot] [PATCH 11/19] lpc2292: " Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02                     ` [U-Boot] [PATCH 12/19] arm720t/clps7111: " Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02                       ` [U-Boot] [PATCH 13/19] omap3: remove duplicate interrupts code Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02                         ` [U-Boot] [PATCH 14/19] imx: move serial driver to drivers/serial Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:02                           ` [U-Boot] [PATCH 15/19] davinci: move nand driver to drivers/mtd/nand Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:03                             ` [U-Boot] [PATCH 16/19] davinci: move i2c driver to drivers/i2c Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:03                               ` [U-Boot] [PATCH 17/19] s3c24x0: move serial driver to drivers/serial Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:03                                 ` [U-Boot] [PATCH 18/19] s3c24x0: move i2c driver to drivers/i2c Jean-Christophe PLAGNIOL-VILLARD
2009-03-29 21:03                                   ` [U-Boot] [PATCH 19/19] s3c2410: move nand driver to drivers/mtd/nand Jean-Christophe PLAGNIOL-VILLARD
2009-03-30 13:39                         ` Dirk Behme [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49D0CB93.1060005@googlemail.com \
    --to=dirk.behme@googlemail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox