From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Date: Sat, 04 Apr 2009 06:54:13 -0500 Subject: [U-Boot] [PATCH 1/8] ZOOM2 Add initial support for Zoom2 In-Reply-To: <49D719F6.7040208@googlemail.com> References: <1238641341-26714-1-git-send-email-Tom.Rix@windriver.com> <49D719F6.7040208@googlemail.com> Message-ID: <49D74A65.5030007@windriver.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dirk Behme wrote: > Hi Tom, > > Tom Rix wrote: >> Zoom2 is a new board from Texas Instruments and LogicPD >> This is the product description >> http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp >> >> >> This patch provides a zoom2 base target by copying zoom1 and by >> making some >> obvious changes. This target compiles but does not yet run. >> >> To configure, run >> make omap3_zoom2_config >> >> Signed-off-by: Tom Rix >> --- >> MAINTAINERS | 4 + >> MAKEALL | 1 + >> Makefile | 3 + >> board/omap3/common/Makefile | 1 + >> board/omap3/zoom2/Makefile | 49 +++++++ >> board/omap3/zoom2/config.mk | 33 +++++ >> board/omap3/zoom2/u-boot.lds | 63 +++++++++ >> board/omap3/zoom2/zoom2.c | 79 +++++++++++ >> board/omap3/zoom2/zoom2.h | 134 ++++++++++++++++++ >> include/configs/omap3_zoom2.h | 311 >> +++++++++++++++++++++++++++++++++++++++++ > > I'm not sure if I overlooked it in one of the other patches, but if > not: Do you like to update > > doc/README.omap3 > > too? > Yes. I will do this. Tom > Best regards > > Dirk