[U-Boot] iPAQ 21x support (+PXA3xx NAND flash and MMC)

[Oliver Ford <ipaqlinux@oliford.co.uk>]

Daniel Mack wrote:
> Hi Oliver,
>
> getting back to this ancient thread now as I just got back to this
> project.
>   
...
>
> Very cool - this helped me a lot and works well on a PXA303 board.
> Thanks again. Did you try any further to bring this upstream?
>
>
>   

Good to hear it helped and no, I've not even looked at getting the ipaq 
stuff into either the mainline kernel or u-boot. I don't really have the 
time to even read the u-boot mailing list posts let alone commit to 
merging it.

> And would you share the relevant parts of your config, especially those
> which define the environment storage?
>   

Iirc, I have it set with no environment but just set a big boot command 
to set it all up.

The ipaq214 config is here:
http://www.oliford.co.uk/hpipaq214/public/u-boot/ipaq214.h
(ignore the other files in that dir)

and my u-boot git tree is here if you want anything else:
http://www.oliford.co.uk/hpipaq214/u-boot.git/

It also now has in there MMC/SD and basic keypad and LCD support for the 
PXA310.

Let me know if there's anything else you want.

Oliver