From: prathika <prathika@deeopl.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] UART2 Console in u-boot
Date: Fri, 17 Apr 2009 13:58:08 +0530 [thread overview]
Message-ID: <49E83D98.6060400@deeopl.com> (raw)
hi all,
this might a little silly question. but still wanted to confirm with you
all.
i have a board with PPC440 EP where I load u-boot configuring for
yosemite as my design is similar to that.
I want the console to configured for the UART's second channel.
Is it enough if I change the base address to second channel..Because
there are UART base address defined only for UART0 and UART1 even if
CONFIG_SERIAL_MULTI is defined.
Some one please clarify my doubt.
Thanks & Regards,
Prathika R
next reply other threads:[~2009-04-17 8:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-17 8:28 prathika [this message]
2009-04-17 9:07 ` [U-Boot] UART2 Console in u-boot Stefan Roese
2009-04-17 9:27 ` prathika
2009-04-17 9:37 ` Stefan Roese
2009-04-20 3:50 ` prathika
2009-04-25 4:10 ` prathika
2009-04-25 6:31 ` prathika
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49E83D98.6060400@deeopl.com \
--to=prathika@deeopl.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox