[U-Boot] Bug in new at91 clock framework?

[Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>]

Jean-Christophe PLAGNIOL-VILLARD schrieb:
>> I'm working on git://git.denx.de/u-boot-at91.git branch clock
>> I also have an AT91SAM9263-EK, but with a 16.0 MHz main oscillator.
>> Everything is fine, as long as no changes were made. But if I undef
>> CONFIG_USB_ATMEL and CONFIG_CMD_USB, the board does not boot. Only
>> some cryptical characters appear after the "RomBOOT" term. It's the
>> same behavior as on my own board.
> use git://git.denx.de/u-boot-at91.git branch master
> 
> Best Regards,
> J.
> 
Thank you, it works now. But I have to apply the attached patch.
Otherwise, I get a compiler error
cpu/arm926ejs/at91/libat91.a(clock.o): In function `at91_clock_init':
/data/home/danielg/git/u-boot-at91_new/cpu/arm926ejs/at91/clock.c:167: undefined reference to `at91_pll_rate'

---
 From 730db691fabf958d1b3d74e678f7f47a0776df16 Mon Sep 17 00:00:00 2001
From: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Date: Thu, 23 Apr 2009 15:37:16 +0200
Subject: [PATCH] at91: fixed cpu/arm926ejs/at91/clock.c

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
---
  cpu/arm926ejs/at91/clock.c |    2 +-
  1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c
index 31e53b3..f776f70 100644
--- a/cpu/arm926ejs/at91/clock.c
+++ b/cpu/arm926ejs/at91/clock.c
@@ -126,6 +126,7 @@ static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
  fail:
  	return 0;
  }
+#endif

  static u32 at91_pll_rate(u32 freq, u32 reg)
  {
@@ -141,7 +142,6 @@ static u32 at91_pll_rate(u32 freq, u32 reg)

  	return freq;
  }
-#endif

  int at91_clock_init(unsigned long main_clock)
  {
-- 
1.6.1