[U-Boot] [PATCH u-boot git] dm9000 EEPROM reading bugfix

[Ben Warren <biggerbadderben@gmail.com>]

Wolfgang,

David Brownell wrote:
> From: David Brownell <dbrownell@users.sourceforge.net>
>
> Make the U-Boot dm9000 driver read addresses from EEPROM just
> like Linux does ... read six bytes, instead of reading twelve
> bytes and then discarding every other one.
>
> Using the right Ethernet address is a big win.
>
> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> ---
>  drivers/net/dm9000x.c |   12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> --- a/drivers/net/dm9000x.c
> +++ b/drivers/net/dm9000x.c
> @@ -113,7 +113,7 @@ void eth_halt(void);
>  static int dm9000_probe(void);
>  static u16 phy_read(int);
>  static void phy_write(int, u16);
> -u16 read_srom_word(int);
> +static void read_srom_word(int, u8 *);
>  static u8 DM9000_ior(int);
>  static void DM9000_iow(int reg, u8 value);
>  
> @@ -348,8 +348,8 @@ eth_init(bd_t * bd)
>  	/* Set Node address */
>  	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
>  #if !defined(CONFIG_AT91SAM9261EK)
> -		for (i = 0; i < 6; i++)
> -			enetaddr[i] = read_srom_word(i);
> +		for (i = 0; i < 3; i++)
> +			read_srom_word(i, enetaddr + 2 * i);
>  		eth_setenv_enetaddr("ethaddr", enetaddr);
>  #endif
>  	}
> @@ -541,14 +541,14 @@ eth_rx(void)
>  /*
>    Read a word data from SROM
>  */
> -u16
> -read_srom_word(int offset)
> +static void read_srom_word(int offset, u8 *to)
>  {
>  	DM9000_iow(DM9000_EPAR, offset);
>  	DM9000_iow(DM9000_EPCR, 0x4);
>  	udelay(8000);
>  	DM9000_iow(DM9000_EPCR, 0x0);
> -	return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
> +	to[0] = DM9000_ior(DM9000_EPDRL);
> +	to[1] = DM9000_ior(DM9000_EPDRH);
>  }
>  
>  void
>
> ____
Please apply this directly. I incorrectly looked at it as a feature 
rather than a bug fix.

regards,
Ben